Datasheet

5
H7HP
■ Operating Modes
Nomenclature
0
0.0 h
CP1
CP2
Total Counters
Time Counters
Reset input
Display
Display
display
Reset input
Gate input
Start input
999999
(see note)
−99999
(see note)
99999.9h *
Note: Display values are shown for a 6-digit model.
The count value will return to "0" when "999999" is exceeded.
The display and output are turned OFF when the power
supply turns OFF, but the count value is stored internally.
Note: The count value will return to "0" when "99999.9" is exceeded.
The display and output are turned OFF when the power supply
turns OFF, but the count value is stored internally.
* Display values are shown for full scale set to 99999.9 h.
2
1
3
1. Reset Key
Resets the count value, but will not operate while the keys are protected.
2. Key Protection Indicator
Lit while the keys are protected (Reset Key is disabled.).
3. DIP Switch
Use to change a setting. Refer to DIP Switch Settings for details.
(The figure shows the DIP switch
label stuck to the rear of the case.)