Datasheet

H3CR-F
32
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Dimensions with Flush Mounting Adapter
H3CR-F
H3CR-FN
H3CR-F8
H3CR-F8N
66.6
44.8 × 44.8
44.8 × 44.8
52.3
0.7
6
17.4
5.7
37 din.
14 din.
11 pins
48
48
8 pins
66.6
52.3
0.7
6
17.4
5.7
48
48
37 din.
14 din.
5258
42
48
P3G
Back Connecting Socket
(Order separately)
Panel
45
+0.6
-0
(N)
45
+0.6
-0
0.5 R max.
Y92F-30 Flush Mounting Adapter (Order Separately)
Note: 1. The orientation of the Adapters for two or more Timers is
different for a horizontal or vertical layout. Make sure the
orientation is correct.
Consecutive Mounting of n Timers
Without Front Covers: N = (48n - 2.5) + 1 - 0
With Front Covers: N = (51n - 5.5) + 1 - 0
With Panel Covers: N = (50n - 4.5) + 1 - 0
2.
The applicable thickness of the mounting panel must be 1 to 5 mm.
Mounting Hole Dimensions
(Conform to DIN 43700.)
65 to 66
52 to 53
76
±0.2
0.5 R max.
Adapter mounting holes: Two, 4.5 d
P3G
Back Connecting Socket
Panel
52.358
88 45
±0.15
45
±0.15
Insert the Timer
in this direction.*
Y92F-73 Flush Mounting Adapter (Order Separately)
Note: The applicable thickness of the mounting panel must be 1 to
3.2 mm.
* Insert the Timer from the back of the Adapter.
Note: A Front Cover and Flush Mounting Adapter cannot be used at the
same time.