Datasheet

4
Products Related to Common Sockets and DIN Tracks
Note: 1. The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals.
2. Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.
*1. Use a #1 Phillips screwdriver to tighten the screws on this Socket.
*2. The structure does not resist flux. Manual soldering is recommended for this product.
Note: The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals.
* Use a #1 Phillips screwdriver to tighten the screws on this Socket.
* The structure does not resist flux. Manual soldering is recommended for this product.
Minimum Order Lot The following models are available at the minimum order lot specified below.
Model
PTF (front-mounting), page 17
PT (back-mounting), page 18
Number
of pins
Solder terminals Wrapping terminals PCB terminals
8 pins
11 pins
14 pins
Number of pins
Model
PYF PY PTF PT Minimum order lot (pcs)
8 pins
PYF08A
PYF08M
PY08 PTF08A PT08
10
11 pins PYF11A PY11 PTF11A PT11
14 pins PYF14A PY14 PTF14A PT14
PTF08A Approx. 47 g PTF08A-E
*1
PT08 Approx. 11 g
PT08QN
Approx. 10.4 g
PT08-0
*2
Approx. 8 g
PTF11A Approx. 61 g
PT11 Approx. 13 g
PT11QN
PT11-0
*2
Approx. 12.2 g
PTF14A Approx. 77 g PTF14A-E
*1
PT14 Approx. 17 g
PT14QN
Approx.
20 g
PT14-0
*2
Approx. 16.2 g
Model P7S/P7SA, pages 20 and 21
Number
of pins
Front-mounting PCB terminals
10 pins
14 pins
P7SA-10F Approx. 44 g
P7SA-10F-ND Approx. 44 g
P7SA-10P Approx. 9 g
P7S-14F-END Approx. 110 g
P7SA-14F Approx. 59 g
P7SA-14F-ND Approx. 59 g
P7S-14P-E Approx. 25 g
P7SA-14P Approx. 10 g
Model
P7LF (front-mounting), page 20
Number
of pins
6 pins
P7LF-06 Approx. 60 g
Note: Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.