Datasheet

ManualsBrandsOmron Industrial Automation ManualsRelay AccessoriesRelay socket G2R-2-S, Push-In Plus Terminal

New Product

Push-In Plus Terminal Block Sockets

PYF-@@-PU/P2RF-@@-PU

Sockets with Push-In Plus Terminal Blocks

to Save Work Added to Series for MY and

G2R-S Relays

• Push-In Plus terminal blocks are used to save wiring work in

comparison with traditional screw terminals.

(Wiring time is reduced by 60%* in comparison with traditional

screw terminals.)

• No screw loosening means maintenance-free application.

• Light insertion force and strong pull-out strength to achieve both

less wiring work and high reliability.

• ‘Hand-free’ structure that holds an inserted screwdriver to

achieve easier wiring work for stranded wires.

• Two wires can be independently inserted into each terminal hole.

• DIN Track mounting or screw mounting.

* According to OMRON actual measurement data from November 2015.

Features

• Coil terminals and contact terminals are completely separated in an organized wiring layout.

• A Release Lever is provided as a standard feature.

• DIN terminal numbers are indicated.

• The double fixture rail with DIN hook tabs attached to the top and bottom lets you mount the Socket from either the top or bottom.

• Front-in short bar enables easy installation without interference in duct when wiring.

• Please refer short bar correspondence table in page 6 for further information of short bar.

• There are screw mounting holes in the DIN hooks on the PYF-@@-PU and P2RF-@@-PU. Pull out the DIN hook tabs to mount the Sockets with

screws.

For the most recent information on models that have been

certified for safety standards, refer to your OMRON website.

Refer to Safety Precautions on page 7.

DIN hook tab (the fixture rail)

Coil terminals

Coil short bar insertion holes

Release lever

(standard feature)

Contact terminals (commons)

NC contact terminals

NO contact terminals

Contact short bar insertion holes

Double

fixture

rails

Back of Push-In Plus

Terminal Block Socket

The fixture rails can be

pulled out to mount the

Relays with screws.

Summary of content (11 pages)

PAGE 1
New Product Push-In Plus Terminal Block Sockets PYF-@@-PU/P2RF-@@-PU Sockets with Push-In Plus Terminal Blocks to Save Work Added to Series for MY and G2R-S Relays • Push-In Plus terminal blocks are used to save wiring work in comparison with traditional screw terminals. (Wiring time is reduced by 60%* in comparison with traditional screw terminals.) • No screw loosening means maintenance-free application.
PAGE 2
PYF-@@-PU/P2RF-@@-PU Ordering Information Sockets PYF Series Socket Applicable model (typical example) Model * No. of poles General Purpose Relays MY Series G3FM Series SSR 2 PYF-08-PU MY4 4 PYF-14-PU 1 PYF-08-PU H3Y(N)-2-B 2 PYF-08-PU-L H3Y(N)-4-B 4 PYF-14-PU-L G3FM G3F/G3FD Series H3Y Series H3YN Series Timers MY2 G3F G3FD * The PYF-@@-PU-L Sockets do not have release levers. P2RF Series Socket Applicable model (typical example) Model No.
PAGE 3
PYF-@@-PU/P2RF-@@-PU Ratings/Characteristics Characteristics PYF-@@-PU(-L) Item P2RF-@@-PU Model PYF-08-PU (-L) Ambient operating temperature −40 to 70°C Ambient operating humidity 5 to 85% Continuous carry current * 10 A PYF-14-PU (-L) 6A Between contact terminals of same polarity 2,000 VAC, 1 min 2,000 VAC, 1 min Dielectric Between contact terminals strength of different polarity 2,000 VAC, 1 min 2,000 VAC, 1 min Between coil and contact terminals 2,000 VAC, 1 min 2,000 VAC, 1 min Item
PAGE 4
PYF-@@-PU/P2RF-@@-PU Dimensions (Unit: mm) Sockets PYF-08-PU(-L) 71.5 max. Terminal Arrangement/ Internal Connection Diagram (TOP VIEW) 52.1 A1 67.5 (13) A2 (14) 30.8 28.1 Mounting Hole Dimensions (4.2) 27.6 Two M4 screw holes or two 4-dia. holes 108 Release lever * 35.5 12 90 max. 27.25 27.6 36.3 3.9 31 max. (4.2) 45 * The PYF-08-PU-L Sockets do not have release levers.
PAGE 5
PYF-@@-PU/P2RF-@@-PU P2RF-05-PU 56.5 max. Terminal Arrangement/ Internal Connection Diagram (TOP VIEW) A2 52.4 (1) A1 (5) 28.1 27.6 Mounting Hole Dimensions (3) Two M4 screw holes or two 4-dia. holes 108 35.5 90 max. Release lever 12 (2) 14 (3) 11 27.25 (4) 27.6 Note: The numbers in parentheses are traditionally used terminal numbers. (3) 36.3 3.9 15.5 max. 45 52.1 Note: Pull out the hooks to mount the Relay with screws. P2RF-08-PU 56.5 max.
PAGE 6
PYF-@@-PU/P2RF-@@-PU Accessories (Order Separately) Short Bars PYDN-7.75-@@ (7.75 mm) 3.90 L 12 18.5 2.25 Application For Contact terminals (common) Pitch 7.75 mm For Coil terminals 3.90 18.5 12 1.57 2.25 224.35 31 mm PYF-@@-PU 15.5 mm P2RF-@@-PU 12 L (Length) 2 15.1 3 22.85 4 30.6 20 154.6 Model * Colors Maximum carry current PYDN-7.75-020@ PYDN-7.75-030@ Red (R) Blue (S) Yellow (Y) PYDN-7.75-040@ PYDN-7.75-200@ 8 224.35 PYDN-31.0-080@ 8 115.85 PYDN-15.
PAGE 7
PYF-@@-PU/P2RF-@@-PU Safety Precautions Be sure to read the Common Precautions for All Relays in the website at the following URL: http://www.ia.omron.com/. Warning Indications WARNING Precautions for Safe Use Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally there may be significant property damage.
PAGE 8
PYF-@@-PU/P2RF-@@-PU Precautions for Correct Use • Do not transport the Socket under the following conditions. Doing so may occasionally result in damage, malfunction, or deterioration of performance characteristics. • Locations subject to high temperature or high humidity • Locations subject to condensation due to rapid changes in temperature • Do not use or store the Socket in the following locations.
PAGE 9
PYF-@@-PU/P2RF-@@-PU Recommended Flat-blade Screwdriver Use a flat-blade screwdriver to connect and remove wires. Use the following flat-blade screwdriver. The following table shows manufacturers and models as of 2015/Dec. Side Front 2.5 mm dia. 0.4 mm 2.5 mm Model Manufacturer ESD0.40✕2.5 Wera SZS 0.4✕2.5 SZF 0-0.4×2.5 * Phoenix Contact 0.4✕2.5✕75 302 Wiha AEF.2.5✕75 Facom 210-719 Wago SDI 0.4✕2.5✕75 Weidmuller * OMRON's exclusive purchase model XW4Z-00B is available to order as SZF 0-0.
PAGE 10
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).
PAGE 11
OMRON Corporation Industrial Automation Company Authorized Distributor: Kyoto, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69, 2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC 2895 Greenspoint Parkway, Suite 200 Hoffman Estates, IL 60169 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No.