Datasheet

ManualsBrandsOmron Industrial Automation ManualsDIN-Rail Power SuppliesPower Supply, 60W, 100 ... 240 V, 24V, 2.5A

Switch Mode Power Supply S8TS L-25

Power

Supplies

Switch Mode Power Supply

S8TS

Block-type Switch mode Power Supply That

Mounts to DIN Track

• Power supply range of 60 to 240 W available with just one model

(24-V models).

• Easy creation of multi-power supply configurations with different

output power supplies connected together (24-V, 12-V, and 5-V

models).

• Improve power supply system reliability by creating N+1 redun-

dant systems (24-V and 12-V models).

• Approved by UL/CSA standards, EN60950 (IEC 950), and VDE

0160.

Model Number Structure

■ Model Number Legend

Ordering Information

■ Basic Block

■ Bus Line Connector

Note 1. One S8T-BUS01 Connector and one S8T-BUS02 Connector are included as accessories.

2. Bus Line Connectors are ordered separately if necessary.

3. Attached connectors: 2ESDPLM-05P (for output terminal) and 3ESDPLM-03P (for input terminal) made by DINKLE ENTERPRISE.

4. One package contains 10 S8T-BUS01 Connectors.

5. One package contains 10 S8T-BUS02 Connectors.

1 2 3 4

S8TS-@@@@@@-@@

1. Capacity 2. Output Voltage 3. Structure 4. Bus Line Connectors

060: 60 W

030: 30 W

025: 25 W

24: 24 V

12: 12 V

05: 5 V

None: Screw terminals

F: Connector

terminals

None: Basic Block only

E1: S8T-BUS01 and

S8T-BUS02

included

Output voltage Output current Screw terminal type Connector terminal type

(See note 3.)

With Bus Line

Connectors

(See note 1.)

Without Bus Line

Connectors

(See note 2.)

With Bus Line

Connectors

(See note 1.)

Without Bus Line

Connectors

(See note 2.)

24 V 2.5 A S8TS-06024-E1 S8TS-06024 S8TS-06024F-E1 S8TS-06024F

12 V 2.5 A S8TS-03012-E1 S8TS-03012 S8TS-03012F-E1 S8TS-03012F

5 V 5 A --- S8TS-02505 --- S8TS-02505F

Type Number of Connectors Model number

AC line + DC line bus

(For parallel operation)

1 Connector S8T-BUS01

10 Connectors (See note 4.) S8T-BUS11

AC line bus

(For series operation or isolated operation)

1 Connector S8T-BUS02

10 Connectors (See note 5.) S8T-BUS12

Summary of content (14 pages)

PAGE 1
Switch Mode Power Supply S8TS Block-type Switch mode Power Supply That Mounts to DIN Track • Power supply range of 60 to 240 W available with just one model (24-V models). • Easy creation of multi-power supply configurations with different output power supplies connected together (24-V, 12-V, and 5-V models). • Improve power supply system reliability by creating N+1 redundant systems (24-V and 12-V models). • Approved by UL/CSA standards, EN60950 (IEC 950), and VDE 0160.
PAGE 2
Specifications ■ Ratings/Characteristics 24/12-V Models (Basic Block: S8TS-06024@/S8TS-03012@) Item Single operation Efficiency Input Voltage 100 to 240 VAC (85 to 264 VAC) Frequency 50/60 Hz (47 to 63 Hz) Current 100 V input 24-V models: 1.0 A max. 12-V models: 0.7 A max. 24-V models: 1.0 A × (No. of Blocks) max. 12-V models: 0.7 A × (No. of Blocks) max. 200 V input 24-V models: 0.5 A max. 12-V models: 0.4 A max. 24-V models: 0.5 A × (No. of Blocks) max. 12-V models: 0.4 A × (No.
PAGE 3
5-V Models (Basic Block: S8TS-02505@) Item Single operation Efficiency (typical) Input 62% min. (with rated input, 100% load) Voltage 100 to 240 VAC (85 to 264 VAC) Frequency 50/60 Hz (47 to 63 Hz) Current 100 V input 0.7 A max. 200 V input 0.4 A max. Power factor 0.8 min. (with rated input, 100% load) Leakage current Inrush current (25°C, cold start) (See note 2.) Output (See note 2.) Additional functions Other 100 V input 0.35 mA max. 240 V input 0.7 mA max. 100 V input 25 A max.
PAGE 4
Connections ■ Block Diagrams S8TS-06024@ and S8TS-03012@ AC (L) +V Fuse 2.
PAGE 5
■ Installation Basic Blocks with Screw Terminals: S8TS-@@@@@ 1 10 1 2 3 L Basic Blocks with Connector Terminals: S8TS-@@@@@F 2 L N 3 10 N INPUT INPUT 50/60Hz AC100 -240V 1.0A 50/60Hz AC100 -240V 1.0A L L N N S8TS-06024F S8TS-06024 POWER SUPPLY +V POWER SUPPLY -V +V -V 7 8 9 DC ON Class2 Power Supply DC LOW OUTPUT V.ADJ DC LOW DC24V 2.5A -V Class2 Power Supply DC LOW OUTPUT V.ADJ DC LOW DC24V 2.
PAGE 6
Operation Maximum Number of Blocks That Can Be Linked Mounting and Removing Bus Line Connectors Basic Blocks can be linked using Bus Line Connectors. Pay attention to the following points to maintain electrical characteristics. Increasing Output Capacity Models Number of Blocks N+1 Redundant System S8TS-06024@ 4 Blocks Yes, 5 Blocks S8TS-03012@ 4 Blocks Yes, 5 Blocks S8TS-02505@ No No • Do not insert/remove the Connectors more than 20 times. • Do not touch the Connector terminals.
PAGE 7
Series Operation 24/12-V models L 5-V models L N 24/12-V models 5-V models L N Inrush Current ± Output L N N The inrush current per Basic Block is 25 A max. at 100 VAC and 50 A max. at 200 VAC. When N Blocks are linked together, the inrush current will be equal to N times that for 1 Basic Block. Be sure to use a fuse with the appropriate fusing characteristics or a breaker with the appropriate tripping characteristics.
PAGE 8
Engineering Data ■ Derating Curves Parallel Operation and Side-by-side Mounting N+1 Redundant System Single Operation with Spaces between Blocks 20 mm min.
PAGE 9
■ Inrush Current, Startup Time, Hold Time Input ON Input OFF AC input voltage ■ Undervoltage Indicator and Undervoltage Detection Output When a drop in the output voltage is detected, the red indicator (DC LOW) lights and transistor (DC LOW: OUT) output turns ON. The detection voltage is set to approximately 80% (75% to 90%) of the rated output voltage. This function monitors the voltage at the output terminals. For accurate confirmation of the output status, measure the voltage at the output terminal.
PAGE 10
Dimensions Note: All units are in millimeters unless otherwise indicted. S8TS-@@@@@ LOCK 4 10 2.5 L N INPUT 50/60Hz AC100 -240V 1.0A L N 100 S8TS-06024 POWER SUPPLY +V 120 35 80.7 -V DC ON Class2 Power Supply DC LOW OUTPUT V.ADJ DC24V 2.5A -V DC LOW +V 5.6 (Sliding: 15 max.) M4 with square washer 120 43 5 S8TS-@@@@@F LOCK 4 7.62 2.5 L N INPUT 50/60Hz AC100 -240V 1.0A L N S8TS-06024F POWER SUPPLY +V 120 80.7 35 -V DC ON Class2 Power Supply DC LOW OUTPUT V.
PAGE 11
End Plate 10 6.2 PFP-M M4×8 pan-head screw 50 1.8 1 1.8 35.5 35.5 11.5 1.3 4.
PAGE 12
Precautions Wiring !WARNING Do not attempt to take any Block apart or touch the interior of a Block while the power is being supplied. Doing so may result in electric shock. Be sure to wire I/O terminals correctly. When tightening the terminals, do not exert a force of 100 N or more on terminal blocks or connector terminals. Do not link or separate any Blocks while the power is being supplied. Doing so may result in electric shock.
PAGE 13
Operating and Storage Environments DIN Track Mounting Do not use or store the Power Supply in the following locations. Doing so may result in failure, malfunction, or deterioration of performance characteristics. To mount the Block on a DIN track, hook portion (A) of the Block onto the track and press the Block in direction (B). • Do not use in locations subject to direct sunlight. • Do not use in locations where the ambient temperature exceeds the range of the derating curve.
PAGE 14
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. T022-E1-03 L-38 In the interest of product improvement, specifications are subject to change without notice.