Datasheet

ManualsBrandsOmron Industrial Automation ManualsDIN-Rail Power SuppliesDIN Rail Power Supply, 24V, 4.5A, 100W, Adjustable

Switch Mode Power Supply S8VM 1

Switch Mode Power Supply

S8VM (15/30/50/100/150-W Models)

Power Supply Featuring OMRON’s Unique,

New Undervoltage Alarm Function with

Compact Body Contributing to Machine

Downsizing

• New undervoltage alarm function assists in determining causes

of errors (S8VM-@@@24A@/P@ only).

• Broad range of possibilities with 5 capacities and 20 models to

choose from.

• RoHS compliant, including lead-free construction.

• Safety standards:

UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No. 213,

EN50178, EN60950-1

• Harmonic current emissions: Conforms to EN61000-3-2.

• New, attentive design prevents screws from falling out of

terminal block.

• Finger protection prevents electric shock.

• DIN Rail mounting.

Note: Refer to Precautions for Safe Use on page 19.

Note: 300- to 1,500-W models will be released in 2006.

Model Number Structure

■ Model Number Legend

Note: Not all combinations are possible. Please refer to the list of models in Ordering Information on page 2.

Note: 1. The front-mounting type cannot be used as a back-mounting type. For a back-mounting configuration, use a DIN Rail mounting bracket

type.

2. The housing and terminal of the connector for the undervoltage alarm output are provided with the S8VM-05024A@/P@, S8VM-

10024A@/P@ and S8VM-15024A@/P@.

S8VM- @@@@@@@

1. Power Ratings

015: 15 W

030: 30 W

050: 50 W

100: 100 W

150: 150 W

2. Output voltage

05: 5 V

12: 12 V

15: 15 V

24: 24 V

3. Configuration/function

None: Open-frame type Standard type

C: Covered type Standard type

A: Covered type Undervoltage alarm type (Sinking)

(See note.)

P: Covered type Undervoltage alarm type (Sourcing)

(See note.)

4. Configuration

None Front-mounting type

D DIN Rail mounting bracket type

Summary of content (24 pages)

PAGE 1
Switch Mode Power Supply S8VM (15/30/50/100/150-W Models) Power Supply Featuring OMRON’s Unique, New Undervoltage Alarm Function with Compact Body Contributing to Machine Downsizing • New undervoltage alarm function assists in determining causes of errors (S8VM-@@@24A@/P@ only). • Broad range of possibilities with 5 capacities and 20 models to choose from. • RoHS compliant, including lead-free construction. • Safety standards: UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No.
PAGE 2
Ordering Information Note: For details on normal stock models, contact your nearest OMRON representative. Configuration Power ratings Open-frame 15 W type Input voltage 100 to 240 VAC 50 W 100 W 150 W 15 W 30 W 50 W 100 W 150 W Output current Standard type 30 W Covered type Output voltage 100 to 240 VAC 5V 12 V 15 V 24 V 5V 12 V 15 V 24 V 5V 12 V 15 V 24 V 5V 12 V 15 V 24 V 5V 3A 1.3 A 1A 0.65 A 6A 2.5 A 2A 1.3 A 10 A 4.3 A 3.5 A 2.2 A 20 A 8.5 A 7A 4.
PAGE 3
Specifications ■ Ratings/Characteristics Item Efficiency Input Output Additional functions Other Power ratings 5-V models 12-V models 15-V models 24-V models Voltage (See note 1.) Frequency (See note 1.) Current 100-V input 200-V input Power factor 100-V input 200-V input Harmonic current emissions Leakage current 100-V input 200-V input Inrush current 100-V input (See note 2.) 200-V input Voltage adjustment range (See note 3.) Ripple 15 W 30 W 50 W 100 W 150 W 75% min. 75% min. 80% min. 81% min.
PAGE 4
Connections ■ Block Diagrams S8VM-015@@@@ (15 W) S8VM-01524A@ DC LOW1 DC LOW2 Undervoltage alarm indication Undervoltage detection +V AC (L) Fuse 2A INPUT Noise filter AC (N) DC OUTPUT Inrush Smoothing current protection circuit Rectification −V Rectifier/smoothing circuit Drive control circuit Voltage detection circuit Overcurrent detection circuit Overvoltage detection circuit Photocoupler /FG S8VM-030@@@@ (30 W) S8VM-03024A@ Undervoltage DC LOW1 alarm indication DC LOW2 Undervoltage d
PAGE 5
S8VM-100@@@@ (100 W) Inrush Harmonic current current protection Rectification suppression circuit AC (L) Fuse 3.
PAGE 6
Construction and Nomenclature ■ Nomenclature No. Name 1 AC input terminals (L).
PAGE 7
Engineering Data ■ Derating Curve S8VM-15W/30W Load ratio (%) Standard mounting/Horizontal mounting/Face-up mounting 120 Opened type 100 A 80 Covered type 60 40 20 0 −20 −10 0 10 20 30 40 50 60 70 80 Ambient temperature (°C) S8VM-50W 120 Opened type 100 A Face-up mounting Load ratio (%) Load ratio (%) Standard mounting/Horizontal mounting 80 120 Opened type 100 A 80 Covered type Covered type 60 60 40 40 20 20 0 −20 −10 0 10 20 30 40 50 60 0 −20 70 80 −10 0 10 2
PAGE 8
■ Mounting ■ Remote Sensing Function Standard mounting (DIN Rail mounting bracket type) Standard mounting (Front-mounting type) (S8VM-100@@@@/150@@@@ only) Correct Correct This function compensates a voltage drop on the load lines. To use this function, connect after removing the two short bars of the remote sensing terminal. Short bar V.
PAGE 9
■ Overload Protection ■ Overvoltage Protection 50/100/150W (5 V) Output voltage (V) Intermittent operation 0 50 Consider the possibility of an overvoltage and design the system so that the load will not be subjected to an excessive voltage even if the feedback circuit in the Power Supply fails. When an excessive voltage that is approximately 140% of the rated voltage or more is output, the output voltage is shut OFF, preventing damage to the load due to overvoltage.
PAGE 10
■ Probable Causes of Power Supply Errors and Troubleshooting Using Undervoltage Alarm Function Check the following information if the Undervoltage Alarm Function operates. Contact your OMRON representative if the Power Supply does not function normally after checking. The symbols in the table are as follows: : Lit, : Not lit, : Flashing Note: Flashing: The output voltage is unstable, causing the LED to repeatedly turn ON and OFF.
PAGE 11
Probable cause of error Troubleshooting methods --- --- 1 A momentary power failure has occurred in the Check that the output voltage is normal and no problems have occurred in other devices. No problems input. will be caused by continuing to use the Power Supply as is. To clear DC LOW1 (LED display and transistor output status), turn OFF the input power, and wait at least 60 s before turning ON the input Power Supply again. A momentary overload has occurred.
PAGE 12
Dimensions Note: All units are in millimeters unless otherwise indicated. ■ Front-mounting Models S8VM-015@@ S8VM-015@@C S8VM-01524A 80.5 17.6 max. 27 81.5 68±0.5 8.5±0.5 Mounting Holes 62±0.5 Two, M3 (depth: 8 max.) 8.5±0.5 Surface Screw Mounting Side Mounting 15.5±0.5 67±0.3 Two, M3 (depth: 8 max.) 8.5±0.5 Note: The image is the S8VM-01524 Model. Two, 4 dia. 68±0.5 84.5 13.6 max. 33.5 62±0.5 84.5 68±0.5 Bottom Mounting Two, 4 dia. 8.5±0.5 Two, M3 (depth: 8 max.) 67±0.3 62±0.5 8.
PAGE 13
S8VM-050@@ S8VM-050@@C S8VM-05024A S8VM-05024P 120.5 17.6 max. 27 82.5 68±0.5 Mounting Holes Surface Screw Mounting 8.5±0.5 23.5±0.3 Side Mounting 97±0.5 Two, M3 (depth: 8 max.) 8.5±0.5 Two, 4 dia. 15±0.2 83±0.5 8±0.2 68±0.5 Three, M3 (depth: 4 max.) 32.5±0.5 Note: The image is the S8VM-05024 Model. 124.5 13.6 max. 97±0.5 33.5 Bottom Mounting Three, 4 dia. 15±0.2 84.5 68±0.5 83±0.5 8±0.2 8.5±0.5 97±0.5 Two, M3 (depth: 8 max.) 23.5±0.3 8.5±0.5 15±0.2 Three, M3 (depth: 4 max.
PAGE 14
S8VM-150@@ S8VM-150@@C S8VM-15024A S8VM-15024P 160.5 17.6 max. 37.5 82.5 68±0.5 8.5±0.5 Two, M3 (depth: 8 max.) 135±0.5 Mounting Holes 8.5±0.5 Surface Screw Mounting 26.5±0.2 Side Mounting 15±0.2 7.5±0.2 120±0.5 Two, 4 dia. Three, M3 (depth: 4 max.) 25±0.5 68±0.5 Note: The image is the S8VM-15024 Model. 135±0.5 Bottom Mounting Three, 4 dia. 15±0.2 164.5 13.6 max. 44 84.5 68±0.5 8.5±0.5 135±0.5 Two, M3 (depth: 8 max.) 8.5±0.5 26.5±0.2 15±0.2 7.5±0.2 25±0.5 120±0.
PAGE 15
■ DIN Rail Mounting Bracket Models S8VM-015@@D S8VM-015@@CD S8VM-01524AD 14 17.6 max. 80.5 33 3.5 max. 81.5 90.4 5.4 (Sliding: 9 max.) Note: The image is the S8VM-01524D Model. 14 84.5 15 max. 3.5 max. 35.1 84.5 46.2 94.4 5.4 (Sliding: 9 max.) Note: The image is the S8VM-01524AD Model. S8VM-030@@D S8VM-030@@CD S8VM-03024AD 14 17.6 max. 95.5 3.5 max. 33 82 105.4 5.4 (Sliding: 9 max.) Note: The image is the S8VM-03024D Model. 14 99.5 15 max. 3.5 max. 35.1 84.5 46.2 5.
PAGE 16
14 S8VM-050@@D S8VM-050@@CD S8VM-05024AD S8VM-05024PD 17.6 max. 120.5 3.5 max. 33 82.5 130.4 5.4 (Sliding: 9 max.) Note: The image is the S8VM-05024D Model. 14 124.5 15 max. 3.5 max. 35.1 84.5 46.2 5.4 (Sliding: 9 max.) 134.4 Note: The image is the S8VM-05024AD Model. S8VM-100@@D S8VM-100@@CD S8VM-10024AD S8VM-10024PD 14 160.5 17.6 max. 3.5 max. 33 82.5 170.4 5.4 (Sliding: 9 max.) Note: The image is the S8VM-10024D Model. 14 15 max. 164.5 84.5 46.2 5.4 (Sliding: 9 max.
PAGE 17
S8VM-150@@D S8VM-150@@CD S8VM-15024AD S8VM-15024PD 14 160.5 17.6 max. 3.5 max. 39.1 82.5 170.4 5.4 (Sliding: 9 max.) Note: The image is the S8VM-15024D Model. 14 15 max. 164.5 3.5 max. 45.6 84.5 46.2 174.4 5.4 (Sliding: 9 max.) Note: The image is the S8VM-15024AD Model.
PAGE 18
■ DIN Rail (Order Separately) Note: All units are in millimeters unless otherwise indicated. Mounting Rail (Material: Aluminum) PFP-100N PFP-50N 7.3±0.15 4.5 35±0.3 15 25 25 10 25 10 25 27±0.15 1 15(5) * 1,000 (500) * *Values in parentheses are for the PFP-50N. Mounting Rail (Material: Aluminum) 16 PFP-100N2 4.5 35±0.3 27 15 18 25 10 25 Switch Mode Power Supply S8VM 25 1,000 10 25 15 24 29.2 1 1.
PAGE 19
Safety Precautions The internal parts may possibly be damaged if mounting screws are over inserted. Refer to Dimensions on page 12 for maximum depth of insertion inside the Power Supply. !CAUTION Several Power Supplies cannot be connected. (Only S8VM100@@@@/150@@@@) Keep the Power Supply as far away from heating elements as possible when installing. As a reference value, allow at least 50 mm spacing on the right and left sides.
PAGE 20
The table is applicable to wires with 1 to 4 conductors. Keep the current value to within 80% of the values shown in this table when using wires having 5 or more conductors. XH Connector Preparation The following Products are provided with the S8VM-05024A@/P@, S8VM-10024A@/P@ and S8VM-15024A@/P@ for the undervoltage alarm transistor output wiring. Connector S8VMS8VM-10024A@/P@ Manu05024A@/P@ S8VM-15024A@/P@ factured by JST S3B-XH-A-1 BH3B-XH-2 Housing (provided) XHP-3 Terminal (provided) BXH-001T-P0.
PAGE 21
Series Operation In Case There Is No Output Voltage Two Power Supplies can be connected in series. The (±) voltage output can be accomplished with two Power Supplies. The possible cause for no output voltage may be that the overcurrent protection or overvoltage protection has operated. The internal protection circuit may operate if a large amount of surge voltage such as a lightening surge occurs while turning ON the input power.
PAGE 22
Typical Values ■ For Reference Only Power ratings 15 W 30 W 50 W 100 W 150 W Item Efficiency Input 5-V models 78% 81% 85% 87% 87% 12-V models 81% 84% 84% 87% 87% 15-V models 81% 84% 84% 87% 87% 24-V models 82% 86% 84% 88% 88% 230 V input 0.20 A 0.39 A 0.31 A 0.61 A 5 V: 0.73 A 12 V/15 V/24 V: 0.83 A Leakage current 230 V input 0.30 mA 0.35 mA 0.35 mA 0.35 mA 0.35 mA Inrush current (See note 1.) 230 V input 28 A 32 A 32 A 32 A 32 A f=20MHz measuring 5 V: 0.
PAGE 23
Switch Mode Power Supply S8VM 23
PAGE 24
Warranty and Application Considerations Read and Understand this Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.