Datasheet

ManualsBrandsOmron Industrial Automation ManualsDistributors & TestersSensor Cable, M8 Socket - Open End, 2m, 1A, 125V

CSM_XS3_DS_E_7_4

Round Water-resistant Connectors (M8/S8)

XS3

Small Round Water-resistive

Connectors

• Water-resistive, compact connector meets IP67 requirements.

• Conventional M8 screw-on models are available along with S8

snap-in models that connect and disconnect with one touch.

• Ideal for a wide variety of FA and OA applications.

• Connectors on both cable ends require no harness work.

• Some new M8 models with 3 or 5 poles.

• Oil-resistant Polyurethane Robot Cables added.

Refer to Safety Precautions on page 23.

Ratings and Specifications

*1. Models with cable only

*2. Except 5poles

*3. Use the robot cable within a temperature range between 0°C and 70°C to prevent the wires inside the cable from being broken when bending it.

Materials and Finish

Connector

*Except 5poles

Note: The XS3M is for both M8 and S8.

Cables

Note: Only the XS3F (socket) is available with 5 pins.

Pin Arrangement (Engaged Side)

Item Model XS3F/H/W/P/M XS3F-M52@-5@@-A XS3M-M524-1@ XS3R

Rated current 1 ADC 3 ADC 1 ADC

Rated voltage 125 VDC *2 30 VDC 125 VDC

Contact resistance

(connector)

40 mΩ max.

(20 mV max., 100 mA max.)

60 mΩ max.

(20 mVDC max., 100 mA max.)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength

(connector)

1,000 VAC for 1 min

(leakage current: 1 mA max.)

650 VAC for 1 min

(leakage current: 1 mA max.)

1,000 VAC for 1 min

(leakage current: 1 mA max.)

Degree of protection IP67 (IEC60529)

Insertion tolerance 200 times

Cable tensile strength *1 49 N/15 s

Ambient operating

temperature range

−25 to 70°C *3 −25 to 85°C −25 to 70°C

Ambient humidity range 20 to 85%RH

Type M8 S8

Item Model XS3F/H/W/R XS3P/M * XS3M-M524-1@

XS3F/W (Socket side)

XS3H/W (Plug side)

XS3P

Contact block PBT resin (UL94 V-0) light gray or black

Contacts

Phosphor bronze/

nickel base, 0.4-

m gold plating

Brass/nickel base,

0.4-mm gold plating

Phosphor bronze/

nickel base, 0.4-

m gold plating

Brass/nickel base, 0.4-μm gold

plating

Thread bracket Brass/nickel plating or SUS316L —

Brass/nickel plating

—

Body —

Brass/nickel plating

Nickel-plated zinc alloy

—

Shell — TPEE

C-Ring —

Phosphor bronze/tin plating

—

Grounding fixture —

Phosphor bronze/tin plating

—

Nut — Brass/nickel plating —

Brass/nickel plating

Cover

Soft PBT resin

(UL94 V-0)

—TPEE—

O-ring Rubber

Item

Poles

3 poles 4 poles 5 poles

Standard

cable

4 mm dia,

AWG24 (0.2 mm

)

Structure: 0.12 mm/18

4.7 mm dia,

AWG24 (0.2 mm

)

Structure: 0.16 mm/11

Robot cable

4 mm dia,

AWG24 (0.2 mm

)

Structure: 0.08 mm/40

—

Oil-resistant

Polyurethane

Robot cable

—

4.7 mm dia,

AWG22 (0.3 mm

)

Structure: 0.08 mm/60

—

Item Poles 3 poles 4 poles 5 poles

Male

(plug)

contacts

Female

(socket)

contacts

Summary of content (24 pages)

PAGE 1
Round Water-resistant Connectors (M8/S8) XS3 CSM_XS3_DS_E_7_4 Small Round Water-resistive Connectors • Water-resistive, compact connector meets IP67 requirements. • Conventional M8 screw-on models are available along with S8 snap-in models that connect and disconnect with one touch. • Ideal for a wide variety of FA and OA applications. • Connectors on both cable ends require no harness work. • Some new M8 models with 3 or 5 poles. • Oil-resistant Polyurethane Robot Cables added.
PAGE 2
XS3 Wiring System Configuration Sensor End Using Sensors with Connectors Proximity Sensor (M8 Connector Models) Relay Cable Connector with Cable XS3W (screw-on models) E2E Proximity Sensor (Pre-wired Connector Models) XS3W (snap-in models) E2E Fiber Amplifier (Connector models) E3X Multiple XS3W (screw-on and snap-in models) can be used to extend the cable.
PAGE 3
XS3 ( PCB Type indicates mating connectors, and indicates wiring connections.) ■ Personal Computer ■ PT (Programmable Terminal) Terminal Box Connector XS3P Y-Joint XS3R Host Link Cable Used to enable using connectors for terminal boxes. XW2Z Used to wire two Sensors to a single cable.
PAGE 4
XS3 XS3W Connectors with Cables, Connectors on Both Ends (Socket/Plug) Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-@@2@-@@@-@ 1 2 3 4 5 6 1. Fastening Method 3. Cable Connection Direction M: M8 S: S8 2.
PAGE 5
XS3 Ordering Information M8 Screw-on Connectors Cable Specifications No.
PAGE 6
XS3 Right-angle/Straight Connectors Right-angle/Right-angle Connectors 9 dia. 9 dia. 10 dia. M8 × 1.0 4 dia. M8 × 1.0 4 dia. 20.5 21.1 20.5 10 dia. 23.1 23.1 23.1 32 L L ● M8 Screw-on Connectors with Oil-resistant Polyurethane Robot Cable Straight/Straight Connectors Straight/Right-angle Connectors Molded part (black) Molded part (black) 4.7 dia. M8×1 XS3W-M42@-4@@-PR M8×1 9 dia. 4.7 dia. 9 dia. 10 dia. 10 dia. 20.5 21.5 32 31.4 32 L 24.
PAGE 7
XS3 XS3W Connectors with Cables, Connectors on Both Ends (M8 Socket/M12 Plug or M8 Plug/M12 Socket) Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-M@2@-@C2-A 1 2 3 4 5 6 1. Fastening Method 3. Cable Connection Direction M: M8 2.
PAGE 8
XS3 Dimensions (Unit: mm) ● Screw-on Connectors (M8 to M12) XS3W-M@2@-@C2-A XS3W-M32C-3C2-A, XS3W-M42C-4C2-A 200 44.7 2 31.4 (3 cores) 1 14.9 dia. 3 9 dia. 4 4 dia. Plug 1 3 4 Socket M12×1.0 M8×1.0 (4 cores) 1 3 2 4 M8×1.0 XS3W-M32D-3C2-A, XS3W-M42D-4C2-A 200 40.7 1 32 (3 cores) 2 3 14.9 dia. 4 3 4 dia. Socket M12×1.0 1 10 dia. 4 Plug M8×1.0 (4 cores) 3 1 4 2 M8×1.0 Note: For 3-core, M12 connectors, pin 2 is not connected internally.
PAGE 9
XS3F Sockets on One Cable End XS3 Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3F-@@2@-@@@-@ 1 2 3 1. Fastening Method M: M8 S: S8 E: M8 SUS316L Lock 2. Connector Poles 3: 3 poles 4: 4 poles 5: 5 poles 4 5 6 3. Cable Connection Direction 1: Straight 2: Right-angle 4. Connections 5. Cable Length 01: 1 m 02: 2 m 05: 5 m 10: 10 m Pin No. 6.
PAGE 10
XS3 Ordering Information M8 Screw-on Connectors Cable Specifications No.
PAGE 11
XS3 Dimensions ● M8 (Unit: mm) XS3F-M32@-3@@-@ 3 pin Screw-on Connectors with Vibration-proof Robot Cable/Standard Cable Straight Connectors M8 × 1.0 4 dia. 4 3 1 9 dia. 1.75 21.5 3.5 30 5 50 31.4 L 50 L Right-angle Connectors 4 dia. 23.1 30 5 20.5 9 dia. 1 4 Wiring Diagram 3.5 3 1.75 M8 × 1.0 ● M8 Pin No. Cable lead colors 1 Brown 3 4 Blue Black XS3F-@42@-4@@-@ 4 pin Screw-on Connectors with Vibration-proof Robot Cable/Standard Cable Straight Connectors 2.15 M8 × 1.
PAGE 12
XS3 ● M8 XS3F-M42@-40@-PR 4 pin Screw-on Connectors with Oil-resistant Polyurethane Robot Cable Straight Connectors L 31.4 4.7 dia. 4 2 3 1 9 dia. M8×1 (30) (5) (40) Right-angle Connectors L 24.9 4.7 dia. 20.5 5 Molded part (black) 50 9 dia. Wiring Diagram 2 M8×1 1 Pin No. 3.4 2.15 3 4 Cable lead colors 1 2 3 4 0.5 Brown White Blue Black 1.95 ● M8 XS3F-M52@-5@@-A 5 pin Screw-on Connectors with Standard Cable Straight Connectors 1.95 M8 × 1.0 4.7 dia. 2 1.45 4 1.
PAGE 13
XS3 ● S8 Snap-in Connectors with Vibration-proof Robot Cable XS3F-S42@-4@@-R Straight Connectors 2.15 4 dia. 13.9 4 2 3 1 8.2 dia. 1.95 0.5 21.1 3.4 30 5 50 30.7 L Right-angle Connectors 50 L 23.1 30 5 19.8 4 dia. Wiring Diagram 8.2 dia. 2 1 4 3 Pin No. 3.4 2.15 0.5 1.
PAGE 14
XS3 XS3H Plugs on One Cable End Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3H-@@2@-@@@-@ 1 2 3 1. Fastening Method 4 5 6 3. Cable Connection Direction M: M8 S: S8 5. Cable Length 1: Straight 2: Right-angle 2. Connector Poles C3: 0.3 m 01: 1 m 02: 2 m 05: 5 m 4. Connections 3: 3 poles 4: 4 poles Pin No. ➀ ➂ ➃ 3: Brown Blue Black Pin No.
PAGE 15
XS3 Dimensions (Unit: mm) ● M8 3 pin Screw-on Connectors with Vibration-proof Robot Cable Straight Connectors XS3H-M321-3@@-R M8 × 1.0 4 dia. 4 3 1 10 dia. 1.75 21.5 3.5 30 5 50 32 L Wiring Diagram Pin No. Brown 3 4 Blue Black ● M8 4 pin Screw-on Connectors with Vibration-proof Robot Cable Straight Connectors Four, 1 dia. 2.15 M8 × 1.0 2 4 1 3 Cable lead colors 1 XS3H-M42@-4@@-R 4 dia. 12.9 10 dia. 1.95 0.5 21.5 3.4 30 5 50 32 L Right-angle Connectors 50 L 23.1 30 20.
PAGE 16
XS3 ● M8 4 pin Screw-on Connectors with Oil-resistant Polyurethane Robot Cable XS3H-M42@-40@-PR Straight Connectors 2.15 M8 × 1.0 Four, 1 dia. 2 1.95 0.5 4.7 dia. 4 3 10 dia. 1 30 3.4 5 40 32 L Right-angle Connectors L 24.9 4.7 dia. 21.1 5 Molded part (black) 50 M8×1 10 dia. Four, 1 dia. Wiring Diagram 3 4 Pin No. 3.4 2.15 2 1 0.5 1.95 Brown White Blue Black ● S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable Straight Connectors XS3H-S42@-4@@-R Four, 1 dia. 2.
PAGE 17
XS3 XS3P Panel-mounting Sockets for Terminal Boxes Mating Connectors Item XS3P(M8) XS3P(S8) Model XS3H (M8), XS3W (M8) XS3H (S8), XS3W (S8) Note: M8 screw-on models and S8 snap-in models cannot be connected to each other. Ordering Information Connection method M8 screw-on Panel mounting Front lock or rear lock Rear lock S8 snap-in Front lock or rear lock Pin shape DIP pins Solder cup pins Solder cup pins DIP pins Solder cup pins Applicable wires --AWG24 max. AWG24 max. --AWG24 max.
PAGE 18
XS3 Dimensions (Unit: mm) ● M8 Screw-on Sockets with DIP Pins ● M8 Screw-on Sockets with Solder Cup Pins ● M8 Screw-on Sockets with Solder Cup Pins XS3P-M421-1 XS3P-M421-2 XS3P-M422-2 XS3P-M421-1 (DIP Pins) Front lock or rear lock 1.8 Four, 1 dia. 1.95 XS3P-M421-2 (Solder Cup Pins) Front lock or rear lock 16 7.2 2.15 24.9 12.5 7.2 1.8 16 2.15 0.5 0.5 M12 × 1.0 2.5 18 dia. 3.4 M12 × 1.0 1.5 M12 × 1.0 nut 9.4 1.95 1.95 2.15 0.5 0.5 Solder cup hole 0.8 dia. × 2.5 M12 × 1.0 1.
PAGE 19
XS3 XS3M Sensor Embedded Plugs Mating Connectors Item XS3M Model XS3F (M8/S8), XS3W (M8/S8) Note: The plug can be connected to both M8 screw-on and S8 snap-in models. Ordering Information Connection method Embedded model Pin shape DIP pins Solder cup pins Applicable wires --AWG26 max. Model XS3M-K421-1 XS3M-K421-2 Minimum order 200 Note: Orders are accepted in multiples of the minimum order.
PAGE 20
XS3 XS3M Panel-mounting Plugs Mating Connectors Item XS3M-M524-1@ Model XS3F-M52@-5@@-A Ordering Information Lock method Front lock Pin shape Shield pin Applicable wires No DIP pins 4.5 mm (for either round holes or solder cups) Model XS3M-M524-10 AWG26 max. Yes XS3M-M524-11 Note: Orders are accepted in multiples of the minimum order. Dimensions (Unit: mm) ● Front lock DIP pins (5 pins) XS3M-M524-@@ XS3M-M524-10 Front Lock with DIP Pins 4.
PAGE 21
XS3 Safety Precautions In addition to the following information, also refer to Safety Precautions on page 23 Precautions for Correct Use XS3M-M524-@@ Mating To mate the Connectors, align the mating marks on the Plug and Socket (see following figure), insert the Connectors completely, and tighten the lock nut, being careful not to damage the threads. Plug Mating marks Socket XS3M-M524-@@ Panel Mounting After you mount the Connector to the panel, attach the nut and tighten it to a suitable torque (0.
PAGE 22
XS3 XS3R Y-Joint Plug/Socket Connectors Mating Connectors Item Ordering Information For M8 Connectors Model XS3F(M8) XS3H(M8) XS3W(M8) XS3P(M8) XS3R(M8) Cable Connector Connectors on both cable ends With cable Connector on one cable end Without cable Cable length L (m) 0.
PAGE 23
XS3 Safety Precautions Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Connections • The XS3 and XS2 Sensor I/O Connectors cannot be connected to each other. • You cannot mate Connectors that have a different number of poles. • When using Sensors with Connectors or Limit Switches, use the Sensor I/O Connectors specified in the catalog.
PAGE 24
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).