Datasheet

XW5T
19
4. Recommended Ferrules and Crimp Tools
Recommended ferrules
XW5T-P1.5-@-@@/XW5G-@P1.5-@-@@
Note: 1. Make sure that the outer diameter of the wire is smaller than the inner
diameter of the insulation sleeve of the recommended ferrule.
2. Make sure that the ferrule processing dimensions conform
to the following figure.
XW5T-P2.5-@-@@/XW5G-@P2.5-@-@@
Note: 1. Make sure that the outer diameter of the wire is smaller than the inner
diameter of the insulation sleeve of the recommended ferrule.
2. Make sure that the ferrule processing dimensions conform
to the following figure.
XW5T-P4.0-@-@@/XW5G-@P4.0-@-@@
Note: 1. Make sure that the outer diameter of the wire is smaller than
the inner diameter of the insulation sleeve of the
recommended ferrule.
2. Make sure that the ferrule processing dimensions conform
to the following figure.
Recommended Flat-blade Screwdriver
Use a flat-blade screwdriver to connect and remove wires.
Use the following flat-blade screwdriver.
The following table shows manufacturers and models as of 2015/Dec.
* You can order Phenix Contact SZF 0-0.4×2.5 Screwdrivers with
OMRON model number XW4Z-00B.
Applicable wire Ferrule
Conductor
length
(mm)
Stripping
length
(mm)
(Ferrules used)
Recommended ferrules
(mm
2
) (AWG)
Manufactured by
Phoenix Contact
Manufactured
by Weidmuller
Manufactured by
Wago
0.14 26 8 10 AI 0,14-8 H0.14/12 ---
0.25 24
8 10 AI 0,25-8 H0.25/12 FE-0.25-8N-YE
10 12 AI 0,25-10 --- ---
0.34 22
8 10 AI 0,34-8 H0.34/12 FE-0.34-8N-TQ
10 12 AI 0,34-10 --- ---
0.50 20
8 10 AI 0,5-8 H0.5/14 FE-0.5-8N-WH
10 12 AI 0,5-10 H0.5/16 FE-0.5-10N-WH
0.75 18
8 10 AI 0,75-8 H0.75/14 FE-0.75-8N-GY
10 12 AI 0,75-10 H0.75/16 FE-0.75-10N-GY
1/1.25 18/17
8 10 AI 1-8 H1.0/14 FE-1.0-8N-RD
10 12 AI 1-10 H1.0/16 FE-1.0-10N-RD
Recommended crimp tool
CRIMPFOX6
CRIMPFOX6-F
CRIMPFOX10S
PZ6 roto Variocrimp4
Applicable wire Ferrule
Conductor
length
(mm)
Stripping
length
(mm)
(Ferrules used)
Recommended ferrules
(mm
2
) (AWG)
Manufactured by
Phoenix Contact
Manufactured
by Weidmuller
Manufactured by
Wago
0.14 26 8 10 AI 0,14-8 H0.14/12 ---
0.25 24
8 10 AI 0,25-8 H0.25/12 FE-0.25-8N-YE
10 12 AI 0,25-10 --- ---
0.34 22
8 10 AI 0,34-8 H0.34/12 FE-0.34-8N-TQ
10 12 AI 0,34-10 --- ---
0.50 20
8 10 AI 0,5-8 H0.5/14 FE-0.5-8N-WH
10 12 AI 0,5-10 H0.5/16 FE-0.5-10N-WH
0.75 18
8 10 AI 0,75-8 H0.75/14 FE-0.75-8N-GY
10 12 AI 0,75-10 H0.75/16 FE-0.75-10N-GY
1/1.25 18/17
8 10 AI 1-8 H1.0/14 FE-1.0-8N-RD
10 12 AI 1-10 H1.0/16 FE-1.0-10N-RD
1.25/1.5 17/16
8 10 AI 1,5-8 H1.5/14 FE-1.5-8N-BK
10 12 AI 1,5-10 H1.5/16 FE-1.5-10N-BK
2.5 14 10 12 AI 2,5-10 H2.5/16DS FE-2.5-10N-BU
Recommended crimp tool
CRIMPFOX6
CRIMPFOX6-F
CRIMPFOX10S
PZ6 roto Variocrimp4
8 to 10 mm
2.1 mm max.
Ferrule Processed Dimensions
2.5 mm max.
8 to 10 mm
2.6 mm max.
Ferrule Processed Dimensions
2.8 mm max.
Applicable wire Ferrule
Conductor
length
(mm)
Stripping
length
(mm)
(Ferrules used)
Recommended ferrules
(mm
2
) (AWG)
Manufactured by
Phoenix Contact
Manufactured
by Weidmuller
Manufactured by
Wago
0.25 24
12 14
AI 0,25-12 --- ---
0.34 22 AI 0,34-12 --- ---
0.50 20 AI 0,5-12 --- FE-0.5-12N-WH
1/1.25 18/17 AI 0,75-21 H0.75/18 FE-0.75-12N-GY
1.25/1.5 17/16 AI 1-12 H1.0/18 FE-1.0-12N-RD
1.5 16 AI 1,5-12 H1.5/18D FE-1.5-12N-BK
2.5 14 AI 2,5-12 H2.5/19D FE-2.5-12N-BU
4 12 AI 4-12 H4.0/20D FE-4.0-12N-GY
Recommended crimp tool
CRIMPFOX6
CRIMPFOX6-F
CRIMPFOX10S
PZ6 roto Variocrimp4
Model Manufacturer
ESD0.40×2.5 Wera
SZS 0.4×2.5
SZF 0-0.4×2.5*
Phoenix Contact
0.4×2.5×75 302 Wiha
AEF.2.5×75 Facom
210-719 Wago
SDI 0.4×2.5×75 Weidmuller
12 mm
3.2 mm max.
Ferrule Processed Dimensions
3 mm max.
Side
0.4 mm
2.5 mm dia.
2.5 mm
Front