User Manual
Applicable Standards
6
xiii
4 Application Precautions
Caution Be sure to observe the following precautions to ensure safety in installing or
operating the System.
• Do not use the System in an environment subject to flammable, explosive, or
corrosive gases.
• Do not attempt to take any Units apart, to repair any Units, or to modify any
Units in any way.
• Be sure that all the mounting screws, terminal screws, and cable connector
screws are tightened to the torque specified in the relevant manuals.
• Use crimp terminals of specified size for wiring.
• Be sure that the items with locking devices are properly locked into place
before using the System.
• Be sure that the DC Power Supply Unit exclusively designed for the V670
Series is used and is not connected to any other device.
• Be sure that the power supply voltage is within the rated range of 24
VDC+10% and -10%.
• Install the ferrite core supplied with the V670-CD1D according to the
specified instructions.
• Be sure to observe all warnings, cautions, and safety precautions specified
in the manual.
5 Correct Use
Caution Do not install the V670-CD1D and V670-H11 in the following locations:
• Locations subject to direct sunlight.
• Locations subject to condensation as the result of severe changes in
temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to shock or vibration.
Caution
• Do not wire the lines of the RFID System alongside high–tension or power
lines.
• Check the polarity of each terminal and make sure not to make mistakes in
polarity.
Caution Be sure to observe the following precaution when cleaning the V670-CD1D:
• Organic solvents may damage the paint coating on the casing or resin part of
the product. Do not use paint thinner or any other organic solvent to clean
the product.
6 Applicable Standards
The V670-CD1D and V670-H11 conforms to the following standards:
!
!
!
!
EuropeanStandard
EN300330(1999)
EN301489-3(EN301489-1)
FCC(USA)
FCCPart15SubpartC
Besuretoobservethefollowingwiringprecautions
: