User's Manual

18
Section 2 ID Sensor
RFID System
User's Manual
Section 2
Part Names and Functions
 Connected connector:CN2
A high-ranking equipment of PLC is connected.
Military Standard(MIL-C-83503) conforming connector(use connector: Type XG4A-2639-A and made in OMRON)
Connected connector:CN2
Connected connector:CN1
Viewed from the connecting side
Triangular mark
26
25
2
1
Pin No Signal name Lead wire color Description I/O
1 FG Shield Grownd to 100: or less FG
2 --- --- --- ---
3 --- --- --- ---
4 --- Gray/Red --- ---
5 R/W Blue R/W switching input: (R: OFF, W: ON) Input
6
NOISE_IN/WRITE PROTECT Brown
Noise check seeing input
Write protect (ON: effective, OFF: invalid)
Input
7 ADDRS2 Gray/White Adress chift input bit2 Input
8 --- Red --- ---
9 ADDRS0 Light green Adress chift input bit0 Input
10 ADDRS1 Violet Adress chift input bit1 Input
11 ID9 White/Red
Write data input bit10 (Write)
Verify data input bit10 (Verify)
Input
12 ID8 White/Black
Write data input bit9 (Write)
Verify data input bit9 (Verify)
Input
13 ID11 White/Yellow
Write data input bit12 (Write)
Verify data input bit12 (Verify)
Input
14 ID10 White/Green
Write data input bit11 (Write)
Verify data input bit11 (Verify)
Input
15 ID13 White/Blue
Write data input bit14 (Write)
Verify data input bit14 (Verify)
Input
16 ID12 White/Brown
Write data input bit13 (Write)
Verify data input bit13 (Verify)
Input
17 ID15 Gray/Black
Write data input bit16 (Write)
Verify data input bit16 (Verify)
Input
18 ID14 White/Orenge
Write data input bit15 (Write)
Verify data input bit15 (Verify)
Input
19 ID1 Yellow
Write data input bit2 (Write)
Verify data input bit2 (Verify)
Input
20 ID0 Green
Write data input bit1 (Write)
Verify data input bit1 (Verify)
Input
21 ID3 Black
Write data input bit4 (Write)
Verify data input bit4 (Verify)
Input
22 ID2 White
Write data input bit3 (Write)
Verify data input bit3 (Verify)
Input
23 ID5 Bitter orange
Write data input bit6 (Write)
Verify data input bit6 (Verify)
Input
24 ID4 Gray
Write data input bit5 (Write)
Verify data input bit5 (Verify)
Input
25 ID7 Pink
Write data input bit8 (Write)
Verify data input bit8 (Verify)
Input
26 ID6 Light blue
Write data input bit7 (Write)
Verify data input bit7 (Verify)
Input
Note 1. Only the error output line is active when the singnal level is low(OFF). It is set to ON when the power is turned on.
The error output line thus also serves as a RUN output line for powwer-on verification.