Manualshelf

User's Manual

ManualsBrandsOmron ManualsElectronicsReaderWriter/ RFID System
31323334353637383940
43
RFID System
User's Manual
Section 4 ID Sensor
Section 4
Installation
Antenna Connector
Mounting the Antenna
1. Hold the connector part of the Antenna and insert it into the
Antenna port while matching the key on the Unit with the groove
on the connector.
2. Turn the connector clockwise to lock it in place.
Removing the Antenna
1. Turn the connector in counterclockwise to release the lock.
2. Pull the connector straight out of the port.
The connector cannot be removed without turning it to release the lock.
If the cable is pulled without releasing the lock, it may cause the cable or wires to break. Make sure that the lock is
released before pulling out the connector.
Key
Antenna connector
Key
Antenna connector