User's Manual

34
Section 4 Mounting Amplifiers
RFID System
User's Manual
Section 4
Installation
Amplifier Cable Bending Radius
Attaching/Removing V680-HA63A/-HS63/-HS52 Connectors
 Attaching the Connector
 Removing the Connector
The connector will not come out unless the lock is first released by turning the connector. To remove the cable, release
the lock and pull on the connector. Pulling the cable without releasing the lock may break or damage the cable.
1. Hold the Antenna connector, align the key,
and insert the connector into the Amplifier
connector.
2. Turn the connector clockwise to lock it in place.
1. Turn the connector counterclockwise to
release the lock.
2. Pull the Antenna connector straight out.
R35 or
greater
R35 or
greater
Do not bend the cable past a bending radius of 35 mm.
Key
Antenna connector
Antenna connector