User's Manual

3
RFID System
User's Manual
Introduction
Introduction
Alert Symbols for Safe Use
The following symbols are used in this manual to indicate precautions that must be observed to ensure safe
use of the V680-HS63, V680-HS52, and V680-HA63A. The precautions provided here contain important
safety information. Be sure to observe these precautions.
The following signal words are used in this manual.
Meanings of Alert Symbols
Warning
The V680-HS63, V680-HS52, and V680-HA63A conform to the following overseas regulations and standards.
1. FCC Rules (Federal Communications Commission)
This product complies with Part 15 Subpart C of the FCC Rules.
FCC ID: E4E6CYSIDV6800406
FCC NOTICE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's author-
ity to operate the equipment.
Do not remove the ferrite core (TDK Type ZCAT1730-0730A) installed on the cables to suppress RF interference.
Safety Precautions
Indicates a potentially hazardous situation which, if not avoided, will result in minor or mod-
erate injury, or may result in serious injury or death. Additionally, there may be significant
property damage.
Indicates general prohibitions for which there is no specific symbol.
These Products are not designed to be used either directly or indirectly in applications that detect human
presence for the purpose of maintaining safety. Do not use these Products as a sensing means for protect-
ing human lives.
Regulations and Standards
WARNING
WARNING