Instruction Manual

17
SETTING THE HEART GUIDE INDICATOR
2. Press the MEM button to select the buzzer setting.
IftheHeartguideindicatoris“on1”or“on2”:
on1: The buzzer sounds only when the monitor is in proper position.
on2: The buzzer sounds a series of two short blips if your wrist is too far away
from the measuring position, and beeps when your wrist is in the proper
position.
oFF: The buzzer will not sound.
IftheHeartguideindicatoris“oFF”:
on: The buzzer sounds when pressing any buttons.
oFF: The buzzer will not sound.
RESETTING TO THE DEFAULT SETTING
TheHeartguideindicatorisset“on1”,thewristformeasurementisset“ ”,andthe
buzzerisset“on1”asdefault.
To reset to the default setting, press and hold the SET button while in the setting mode,
then press the START/STOP button simultaneously for more than 2 seconds.