Use and Care Manual
Table Of Contents
- Contents
- Important Safety Information
- 1. Know Your Device
- 2. Preparation
- 3. Using the Device
- 4. Error Messages and Troubleshooting
- 5. Maintenance and Storage
- 6. Specifications
- 7. FCC/IC Statement and Trademarks
- 8. Limited Warranty
- 9. Guidance and Manufacturer’s Declaration
- Contenido
- Información importante de seguridad
- 1. Conozca su dispositivo
- 2. Preparación
- 3. Uso del dispositivo
- 4. Mensajes de error y solución de problemas
- 5. Mantenimiento y almacenamiento
- 6. Especificaciones
- 7. Declaración de la FCC/IC y Marcas Registradas
- 8. Garantía limitada
- 9. Guía y declaración del fabricante
14
3. Using the Device
3.3
Taking a Measurement
Notes:
• To stop a measurement, press the START/STOP button once to deflate the arm cuff.
• Remain still and quiet while taking a measurement.
The monitor is designed to take measurements and store the measurement values in
the memory for 2 people using USER ID 1 and USER ID 2.
Using the Single Mode
1. Select your USER ID (1 or 2).
2. Press the START/STOP button.
The arm cuff starts to inflate automatically.
If your systolic pressure is
more than 210 mmHg
After the arm cuff starts to inflate, press and
hold the START/STOP button until the
monitor inflates 30 to 40 mmHg higher than
your expected systolic pressure.
Notes:
• The monitor will not inflate above 299 mmHg.
Inflating to a higher pressure than
necessary may result in bruising where
the arm cuff is applied.
START
INFLATE
DEFLATE
COMPLETE