Use and Care Manual
Table Of Contents
- Contents
- Important Safety Information
- 1. Know Your Device
- 2. Preparation
- 3. Using the Device
- 4. Error Messages and Troubleshooting
- 5. Maintenance and Storage
- 6. Specifications
- 7. FCC/IC Statement and Trademarks
- 8. Limited Warranty
- 9. Guidance and Manufacturer’s Declaration
- Contenido
- Información importante de seguridad
- 1. Conozca su dispositivo
- 2. Preparación
- 3. Uso del dispositivo
- 4. Mensajes de error y solución de problemas
- 5. Mantenimiento y almacenamiento
- 6. Especificaciones
- 7. Declaración de la FCC/IC y Marcas Registradas
- 8. Garantía limitada
- 9. Guía y declaración del fabricante
23
3. Using the Device
EN
TO TRANSFER THE DATA
After the measurement is complete, you can transfer the data (measurement results
of blood pressure and pulse rate).
Notes:
• The stored data can be transferred all at once.
• The date and time settings of your smartphone will sync with the device when transferred.
*Sync occurs if the time between smartphone and device differs more than 10 minutes.
1. Open the app on your smartphone.
2.
Clear your reading screen by pressing the "START/
STOP" button on your monitor. Next, tap the "transfer"
icon in the Omron Wellness app to start the transfer.
* If the data transfer is not starting, refer to “Connection failure. Data cannot be sent.”
in “4. Error Messages and Troubleshooting”.
3. Confirm with your device if the
measurement data is transferred
successfully.
If the display on the right is shown, the data is transferred successfully.
When “Err” appears, refer to “Data cannot be sent.” in section 4.2 for more
detail.