Use and Care Manual
Table Of Contents
- Contents
- Important Safety Information
- 1. Know Your Device
- 2. Preparation
- 3. Using the Device
- 4. Error Messages and Troubleshooting
- 5. Maintenance and Storage
- 6. Specifications
- 7. FCC/IC Statement and Trademarks
- 8. Limited Warranty
- 9. Guidance and Manufacturer’s Declaration
- Contenido
- Información importante de seguridad
- 1. Conozca su dispositivo
- 2. Preparación
- 3. Uso del dispositivo
- 4. Mensajes de error y solución de problemas
- 5. Mantenimiento y almacenamiento
- 6. Especificaciones
- 7. Declaración de la FCC/IC y Marcas Registradas
- 8. Garantía limitada
- 9. Guía y declaración del fabricante
24
3. Using the Device
TO DELETE ALL RESULTS AND SETTINGS
To delete all the information stored in your monitor, follow the instructions below. Make sure that the
monitor’s power has been off.
1. While holding the button down,
press the START/STOP button for
more than 5 seconds.
2. Release the button and START/STOP
button when “CLr” appears on the display.
The “CLr” will appear on the display when your monitor has been
initial setting.
3. Press the START/STOP button to turn the monitor off.
The monitor will automatically turn off after 10 seconds even forgetting the off the
monitor.
Note:
• Initial setting of the monitor will not delete the information in the app.
• The monitor will automatically turn off after 2 minutes.