Computer Hardware User Manual

Appendix AStandard Models
509
Model Numbers
The above cable model numbers specify the type of cable, the length, and the type of connectors attached.
S3200-CN-20-25
1. 2. 3.
1. S3200-CN specifies H-PCF optical fiber cable.
2. The boxes () are replaced by codes indicating the standard model lengths, as shown below.
Consult with your OMRON representative for longer cables. When ordering longer cables, omit the portion
represented by the boxes and specify the length in meters separately, e.g., S3200-CN-20-20, 30 m.
Code Length Code Length
201 2 m 152 15 m
501 5 m 202 20 m
102 10 m Omitted Over 20 m
3. The last two portions of the model numbers (e.g., 20-25) specify the connectors, as shown below.
Code Connector
20 S3200-COCF2011
25 S3200-COCF2511
62 S3200-COCH62M
Applicable Optical Fiber Connectors
Model number/Appearance
Applicable Units
SYSMAC NET SYSMAC LINK
S3200-COCF2011 CV500-SNT31 CV500-SLK11
C1000H-SLK11
S3200-COCF2511 C200HS-SNT32 C200HW-SLK13/14
S3200-COCH62M S3200-LSU03-01E
S3200-NSUA1-00E
S3200-NSUG4-00E
S3200-NSB11-E
C500-SNT31-V4
B700-AL001
---
All Plastic Optical Fiber Cable for SYSMAC BUS
Name Specifications Model number Standards
All Plastic Optical Fiber Cable
Cable only; order desired length in 5 m increments
between 5 and 100 m, or in increments of 200 m or
500 m.
3G5A2-PF002
---
Optical Connectors A Two optical connectors (brown) for APF (10 m max.) 3G5A2-CO001
Optical Connectors B Two optical connectors (black) for APF (8 to 20 m) 3G5A2-CO002
All Plastic Optical Fiber Cable
Set
1-m cable with an Optical Connector A connected to
each end
3G5A2-PF101
Optical Fiber Processing Kit Accessory: 125-mm nipper (Muromoto Tekko’s 550M)
for APF
3G2A9-TL101