Network Card User Manual

ManualsBrandsOmron ManualsNetwork CardE5ZN-DRT

DeviceNet Communications Unit

E5ZN-DRT

Features

DeviceNet Communications Unit Enables Program-free Communications with Temperature

Controllers

DeviceNet

Configurator

DeviceNet

Master

Setting Display Unit

E5ZN-SDL

Operational performance equivalent to

E5CN Digital Temperature Controllers.

Connect up to 16 E5ZN.

Modular Temperature Controller

E5ZN

DeviceNet Communications Unit

E5ZN-DRT

Streamlined Communications from

Temperature Controller to PLC

• The E5ZN Modular Temperature Controller is connected to

the DeviceNet network.

• The I/O link function allows setting and monitoring (e.g., of

present values) for the E5ZN Modular Temperature Controller to

be performed without communications programming.

• Up to 16 E5ZN Modular Temperature Controllers can be con-

nected to one Unit.

• All the parameters for the E5ZN can be uploaded or download-

ed in one operation using DeviceNet Configurator.

Refer to Safety Precautions for All

Temperature Controllers.

http://www.ia.omron.com/

Summary of content (9 pages)

PAGE 1
DeviceNet Communications Unit E5ZN-DRT Streamlined Communications from Temperature Controller to PLC • The E5ZN Modular Temperature Controller is connected to the DeviceNet network. • The I/O link function allows setting and monitoring (e.g., of present values) for the E5ZN Modular Temperature Controller to be performed without communications programming. • Up to 16 E5ZN Modular Temperature Controllers can be connected to one Unit.
PAGE 2
E5ZN-DRT Features Startup Time Is Six Times Faster and No Communications Programs Are Needed Previously, a time-consuming process of creating communications programs, debugging, and checking operations was required for the Temperature Controller to communicate with the PLC. ● For example, setting 10 Units required 60 minutes. ● Incorrect inputs were a concern. ● Separate debugging for each Unit was needed.
PAGE 3
E5ZN-DRT Model Number Structure ■ Model Number Legend 1. E5ZN-DRT DRT: DeviceNet communications 1 Ordering Information ■ List of Models Name External input power supply voltage DeviceNet Communications Unit 24 VDC Applicable Temperature Controller E5ZN Model E5ZN-DRT Terminal Unit E5ZN-SCT24S Note: A DeviceNet Communications Unit and Terminal Unit are required to connect to DeviceNet. Two End Plates are provided with E5ZN-SCT24S Terminal Units.
PAGE 4
E5ZN-DRT ■ Characteristics Insulation resistance 20 MΩ min. (at 100 VDC) Dielectric strength 500 VAC, 50/60 Hz for 1 min between the DIN track and all DeviceNet connector terminals and between the DIN track and all terminal socket terminals Vibration resistance 10 to 55 Hz, 10 m/s2 for 2 hrs each in ±X, ±Y, and ±Z directions Shock resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions Weight 100 g max.
PAGE 5
E5ZN-DRT Nomenclature E5ZN-DRT Back Panel DIP Switch Front Panel Rotary Switches Used to set the node address when functioning as a DeviceNet slave. ×10 Used to specify whether the connection configuration and I/O allocation is set using simple I/O allocation or Configurator I/O allocation. Pin 1: I/O allocation setting switch Pin 2: Not used (Set to OFF.
PAGE 6
Safety Precautions for All Temperature Controllers Refer to the precautions of individual product for more specific details. Warning The following products contain lithium batteries. Do not disassemble, deform under pressure, heat to over 100°C, or incinerate these products. The lithium battery may ignite or explode. Applicable models: E5ZE, E5LD, and E5LC. Caution Do not touch any of the terminals while the power is being supplied. Doing so may result in electric shock.
PAGE 7
Precautions for Correct Use 14. In order that power can be turned OFF in an emergency by the person operating the Temperature Controller, install the appropriate switches and circuit breakers, and label them accordingly. 15. Turn OFF the power before drawing out the Temperature Controller body. Do not touch or apply excessive force to the terminals or electronic parts. When inserting the body, make sure that electronic parts do not come in contact with the case. 16.
PAGE 8
Parameter Displays The following displays are use to represent the characters for parameter names on the Temperature Controller. ● Seven-segment Digital DIsplay A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ● Eleven-segment Digital Display a b c d e f g h i j k lm n o p q r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
PAGE 9
Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.