Datasheet

1
Photomicrosensor (Transmissive)
EE-SX460-P1/EE-1005
Slot/Snap-in Mounted Type
(Slot Width: 5 mm)
• Can be used with wide range of substrates and panels (t = 0.8 to 1.6 mm)
• Featuring enhanced maintainability thanks to a snap-in mounted
structure in which mounting screws are unnecessary and through
use of an all-purpose EI connector manufactured by TE
Connectivity.
• Photo IC output (Light-ON)
• Directly connectable to C-MOS
• Connector with cable (Order Separately) is available.
EE-1005 (see page 3)
Ordering Information
Photomicrosensor
Note: Order in multiples of minimum packing unit.
Ratings, Characteristics and Exterior Specifications
Absolute Maximum Ratings (Ta = 25ºC)
* Refer to the temperature rating chart if the ambient temperature
exceeds 25°C.
Exterior Specifications
Electrical and Optical Characteristics
(Ta = 25°C, Vcc = 5 V±10%)
* The value of the response frequency is measured by rotating the
disk as shown below.
RoHS Compliant
Be sure to read Safety Precautions on Page 3.
Appearance
Sensing
method
Connecting
method
Sensing distance
Aperture size
(H × W) (mm)
Output type Model
Minimum
packing unit
(Unit: pcs)
Transmissive
(slot type)
Connector
Both emitting
side and
detecting side
2.2 × 0.5
Photo IC
EE-SX460-P1
(Light-ON)
1
18
30
11
5 mm (Slot width)
Item Symbol Rated value Unit
Power supply voltage VCC 10 V
Output voltage VOUT 28 V
Output current IOUT 16 mA
Permissible output
dissipation
P
OUT 250* mW
Operating temperature Topr -20 to 75 °C
Storage temperature Tstg -40 to 85 °C
Connecting method Weight (g)
Material
Case Mounting tab
Connector 3 Polycarbonate Polyamide
Item Symbol
Value
Unit Condition
MIN. TYP. MAX.
Current
consumption
I
CC ——30mA
With and
without
incident
Low-level
output
voltage
V
OL ——0.3V
I
OUT = 16 mA,
with incident
High-level
output
voltage
V
OH (VCC × 0.9) — — V
V
OUT = VCC,
without
incident
R
L = 47 kΩ
Response
frequency
f 3 — — kHz
VOUT = VCC*
R
L = 47 kΩ
0.5 mm
0.5 mm
2.1 mm
t = 0.2 mm
Disk