Operation Manual

ManualsBrandsOmron ManualsOtherHEM-907

INSTRUCTION MANUAL

OMRON

Digital Automatic Blood Pressure Monitor

Model

HEM-907

HIDE

SET

100

AUTO

40 1

220

260

280

MODE

AVG.

MANU

CHECK

SING

/OFF

START

STOP

mmHg

SYS

mmHg

DIA

BPM

PUL

ART.

INDEX

Thank you very much for purchasing the

OMRON Digital Automatic Blood Pressure

Monitor.

Requests from OMRON to the

operators and the persons

responsible for maintenance

Please read thoroughly the “Notes on Safety”

of this Instruction Manual before using this unit

so that you can use it safely and correctly after

sufﬁ cient understanding.

After reading this Instruction Manual, please

keep it near the unit all the times for future

reference.

= Read the instruction manual carefully

Table of Contents

Intended use ................................................. 2

Exemptions ................................................... 3

Names and Functions of the Parts ............... 4

Notes on Safety ............................................ 8

Components of the Product ....................... 12

Options ....................................................... 12

How to Apply the Arm Cuff ......................... 13

How to Use the Power Source

(AC Adapter)........................................... 14

How to Measure Blood Pressure ............... 15

SINGLE Mode ........................................ 16

AVG. Mode ............................................. 17

MANU. Mode .......................................... 18

CHECK Mode ......................................... 19

Installation and Replacement of

Battery Pack ........................................... 20

How to Clean the Unit after Use................. 21

List of Error Codes ..................................... 22

Tr oublesh ooting .......................................... 23

Speciﬁ cations ............................................. 24

IM-HEM-907-E7-03-01/2012

5329412-4C

HEM-907-E_B_M03_111006.pdf

Summary of content (26 pages)

PAGE 1
HEM-907-E_B_M03_111006.pdf INSTRUCTION MANUAL SYS OMRON Digital Automatic Blood Pressure Monitor PULS E mm Hg ON/O BPM Model FF HIDE STA P-SE T 140 100 180 220 AU TO RT MO DE AVG. SING LE MAN 260 280 U. CHEC K AV DE F G . LA T I O /1 s t /2 n N d / 3r d DE X M A X STO P AR T. IN HEM-907 mmHg DIA Thank you very much for purchasing the OMRON Digital Automatic Blood Pressure Monitor.
PAGE 2
Intended Use 2 Medical Purpose This is a medical device that measures the brachial blood pressure in a non-invasive manner. Intended User Legally certified: such as doctor, nurse and medical expert. Patient Population It is used on adult patients only. Environment The instrument is used in physicians’ offices, hospitals, clinics and other medical facilities.
PAGE 3
Exemptions OMRON will not bear any responsibilities on the following matters. 1. When a problem or damage occurs caused by the maintenance and/or repair conducted by a person other than OMRON or the dealer specified by OMRON 2. The problem or damage of OMRON product caused by the product of other manufacturer not delivered by OMRON 3. The problem and damage caused by the maintenance and/or repair using the repair parts not specified by OMRON 4.
PAGE 4
Names and Functions of the Parts Main unit 1. LCD display 6. ON/OFF (power) Button SYS 2. HIDE (non-display) Button mmH DIA g 7. START Button PUL SE DC mm Hg ON/O FF BPM AC 8V HID E 3. DC jack P-S 140 100 STA ET 180 4. P-SET (pressure setting) Volume AU TO RT MO D 220 E AVG SINGL E . AV D E F G. L AT ION /1 s t /2n d /3rd MA 260 280 NU . CHE C K STO 8. DEFLATION (deflation control) Button 9. Arm Cuff Connector P 10. STOP Button 5.
PAGE 5
Names and Functions of the Parts Ready to Measure Display Pulse level / Number of irregular pulse waves Number of irregular pulse waves: The pulse wave having a difference of more than ±25% from the average interval of pulse waves is determined as irregular. Number of irregular pulse waves are displayed up to three times. SYS Systolic blood pressure mmHg Example of display DIA Diastolic blood pressure 1 No.
PAGE 6
Names and Functions of the Parts Explanation of Functions (1) Pressure setting function P-SET Inflation can be set by AUTO (automatic setting) or the target value. AUTO (automatic setting): In the SINGLE (single measurement), AVG. (average), and MANU. (auscultation) Modes, the monitor estimates the systolic blood pressure value during inflation and automatically inflates to the proper value. Target value setting: The monitor inflates to the target value.
PAGE 7
Names and Functions of the Parts (4) Setting mode change function You can set the number of times to measure, the waiting time until the start of measurement, and the interval between measurements. Items to set Set value F1 Number of measurements 2 times, 3 times F2 Waiting time until the start of measurement 0 sec, 3 min, 5 min, 10 min. F3 Measurement interval time 5 sec, 30 sec, 1 min, 2 min, 3 min.
PAGE 8
Notes on Safety • The warning signs and the sample icons shown here are listed for you to use the product safely and correctly as well as to prevent the risk and the damage to you and others from happening. • The icons and meanings are as follow. Warning sign Contents Warning Indicates matters in which death or sever bodily damage may arise as a result of incorrect handling. Caution Indicates matters in which bodily harm or material damage* may arise as a result of incorrect handling.
PAGE 9
Notes on Safety Caution When you are not going to use the unit for a long period of time, be sure to remove the AC adapter from the electric outlet. • You may suffer electric shock, or electric leak or fire may arise because of deteriorated insulation. Be sure to remove the AC adapter from the electric outlet when installing, removing, or cleaning the part. • You may suffer electric shock or injure yourself. Pull the AC adapter from the electric outlet when cleaning the unit.
PAGE 10
Notes on Safety Caution Be sure to use the power supply of 230 VAC. • It may cause fire or electric shock. Do not share an electric outlet with other unit or electric appliance. • It may cause fire or electric leak. Do not pull the power cord when pulling out the AC adapter from the electric outlet. • The power cord will be disconnected or shorted and may cause fire or electric shock. Do not install or store the unit where it may be sprayed with water or medication. • You may suffer electric shock.
PAGE 11
Notes on Safety Maintenance 1. Be sure to inspect the unit on regular basis. Check accuracy on a 1 year interval. 2. If the unit has not been used for a while, be sure to confirm that the unit operates normally and safely before use Durability The durability of this unit is five years. (Arm cuff is a consumable.) Measures to take at the time of trouble or accident If a device error (Er9) occurs, take the following procedure promptly. 1. Remove the arm cuff from the patient’s arm. 2.
PAGE 12
Components of the Product Main unit Accessories Medium size arm cuff (with built-in air bag) Model: HEM-9CMC Art.no.: 4928640-0 Applicable arm circumference: 22 to 32 cm MIN RANGE Instruction Manual (with guarantee card) Air tube (1 m) Art.no.: 4928647-8 MAX EX IND ON/O FF ") m(9"~13 22~32c ART. REF -CR19 HEM HIDE STA RT P-S ET 140 100 180 MO D 220 AU TO E AVG. SINGLE MAN U. CHEC 260 280 AV D E F G . L AT I /1 s ON t / 2n d / 3rd AC adapter (80230H907S) Model: HEM-9ADAP Art.no.
PAGE 13
How to Apply the Arm Cuff Warning Requests from OMRON Do not apply the arm cuff during the intravenous injection or transfusion. • Intravenous injection or transfusion is impossible. • Do not use the unit to the patient using a pump oxygenator. • Do not inflate the unit without applying the arm cuff. • Do not use the damaged cuff. 1. Select the arm cuff according to the arm circumference of the patient.
PAGE 14
How to Apply the Arm Cuff (cont.) RANGE RANGE INDEX 22~32cm (9"~13") REF HEM-CR1 9 ART. ART. 7. Adjust the level of the arm cuff to the level of the heart. • Keep the level of the arm cuff at the same level as the heart during the measurement. How to use the Power Source (AC adapter exclusive for this unit) Warning Connect the AC adapter to the DC jack of the main unit [1] and the electric outlet [2].
PAGE 15
How to Measure Blood Pressure Warning Caution If any abnormal matter occurs during the measurement such as the inflation does not stop, remove the arm cuff or pull the air tube from the main unit. ● You may suffer peripheral neuropathy. In the following case, confirm the measurement with the stethoscope. Requests from OMRON Be sure that the patient should not touch the unit. Be sure to monitor all the time that the unit and the patient are not abnormal. ● Do not use the unit in a vehicle.
PAGE 16
How to Measure Blood Pressure (in SINGLE Mode) 1. Wrap the arm cuff over the patient’s arm. 2. Push the ON/OFF (power) Button to turn on the power. ON/OFF START HIDE DEF N AVG L AT I O r d . /1st / 2nd / 3 P-SET 140 MODE SINGLE 180 MANU. CHECK AVG. 220 100 STOP 260 280 AUTO 3. Set the MODE Selector to “SINGLE”. ON/OFF START HIDE DEF N AVG L AT I O r d . /1st / 2nd / 3 P-SET 140 MODE SINGLE 180 MANU. CHECK AVG. 220 100 STOP 260 280 AUTO 5.
PAGE 17
How to Measure Blood Pressure (in AVG. Mode) 1. Wrap the arm cuff over the patient’s arm. 2. Push the ON/OFF (power) Button to turn on the power. ON/OFF START HIDE DEF N AVG L AT I O r d . /1st / 2nd / 3 P-SET 140 MODE SINGLE 180 MANU. CHECK AVG. 220 100 STOP 260 280 AUTO 3. Set the MODE Selector to “AVG.”. ON/OFF START HIDE DEF N AVG L AT I O r d . /1st / 2nd / 3 P-SET 140 MODE SINGLE 180 MANU. CHECK AVG. 220 100 STOP 260 280 AUTO 5. Push the START Button to start the measurement.
PAGE 18
How to Measure Blood Pressure (in MANU. Mode) 1. Wrap the arm cuff over the patient’s arm. 2. Place the stethoscope on the patient’s arm. ON/OFF START HIDE D EF N AVG L AT I O r d . /1 st /2nd / 3 P-SET 140 MODE SINGLE 180 AVG. 220 100 MANU. CHECK STOP 260 AUTO 3. Push the ON/OFF (power) Button to turn on the power. 4. Set the MODE Selector to “MANU.”. ON/OFF ON/OFF START START HIDE HIDE DEF N AVG L AT I O r d . /1st / 2nd / 3 DEF N AVG L AT I O r d .
PAGE 19
How to Measure Blood Pressure (in CHECK Mode) Display of pressure can be confirmed by the CHECK Mode (yearly procedure).
PAGE 20
Installation and Replacement of Battery Pack Warning Do not disassemble or modify the battery pack. Do not throw the battery pack into fire or heat it. Do not charge the battery pack by using equipment other than this unit. If the fluid in the battery pack gets into your eye, wash the eye with sufficient water without rubbing the eye. Then immediately consult the doctor for treatment. • You may suffer injury, or battery fluid may leak, or battery may heat, ignite fire, or explode.
PAGE 21
How to Clean the Unit after Use Caution Requests from OMRON Pull the AC adapter from the electric outlet when cleaning the unit. • You may suffer electric shock. After cleaning the unit, dry it well, then insert the AC adapter to the electric outlet. • You may suffer electric shock. • Do not clean the unit with gasoline, thinner, or high concentration alcohol. • Do not sterilize the unit by autoclave or gas sterilization (EOG, formaldehyde, or high concentration ozone.) 1.
PAGE 22
List of Error Codes Error code Cause Er1 Inflation error • When the pressure does not exceed 15 mmHg after operating a pump for 15 seconds from the start of inflation • When the inflation does not reach the set pressure of the arm cuff within the specified time after starting the inflation How to correct • If the connector of rubber tube connecting the arm cuff and the main unit is loose, connect them correctly, then measure.
PAGE 23
Troubleshooting If a trouble occurs while using the unit, please check the following. Problem The unit inflates to abnormally high (low) pressure. The unit cannot measure blood pressure. The blood pressure values are extremely high (low). What to inspect How to correct Is the arm cuff wrapped correctly? Wrap the arm cuff correctly, and measure again. Is the patient moving his/her arm or body during inflation? Ask the patient not to move his/her arm or body during measurement, and measure again.
PAGE 24
Specifications Name : OMRON Digital Automatic Blood Pressure Monitor HEM-907 Model : HEM-907-E / HEM-907-E7 Display : Digital display Measurement : Oscillometric method Measurement Range : Pressure; 0 to 299 mmHg Pulse rate: 30 to 199 beats/min Accuracy : Pressure; Within +/-3 mmHg Pulse rate; Within +/-5% of reading Inflation : Automatic inflation with pumping Deflation : Automatic deflation by electromagnetic control valve Air Release : Automatic rapid air release by electromagne
PAGE 25
Manufacturer OMRON HEALTHCARE Co., Ltd. 53, Kunotsubo, Terado-cho, Muko, Kyoto, 617-0002 JAPAN EU-representative OMRON HEALTHCARE EUROPE B.V. Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS www.omron-healthcare.com EC REP Production facility OMRON HEALTHCARE Co., Ltd. Mie, JAPAN OMRON HEALTHCARE UK LTD. Opal Drive Fox Milne, Milton Keynes, MK15 0DG, U.K. Subsidiary OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH John-Deere-Str. 81a, 68163 Mannheim, GERMANY www.omron-medizintechnik.
PAGE 26
English Important information regarding Electro Magnetic Compatibility (EMC) Important information for users With the increased number of electronic devices such as PC.s and mobile (cellular) telephones, medical devices in use may be susceptible to electromagnetic interference from other devices. Electromagnetic interference may result in incorrect operation of the medical device and create a potentially unsafe situation. Medical devices should also not interfere with other devices.