Instructions / Assembly

17
Low battery indicator
When the low battery indicator appears on the display, immediately
replace the battery with a new CR2032 battery.
Blinking Battery power is low.
Appears
continuously
Battery power exhausted.
The unit stops measurement.
Data cannot be transferred.
NOTES:
•
Do not remove the battery around 12:00AM. The measurement
results of the day when the battery was removed will be added to
the measurement results for the day the battery was inserted.
(It is assumed that the battery will be removed and replaced with a
new one on the same day.)
• The measurement results are automatically stored in memory on the hour
(e.g. at 12:00AM, 1:00AM, 2:00AM, ... 9:00PM, 10:00PM, 11:00PM).
The measurement results from the hour until the time the battery is
replaced will be deleted for that day.
• When the battery is removed, the time will be reset to “12:00AM”.
Reset the time after inserting the new battery. Refer to “SETTINGS”.
(The measurement results stored in memory and the weight, height
and stride length settings are not deleted.)
• The attached battery is for initial use. The battery life may be
shorter.
BATTERY LIFE