Operation Manual

9
EN
[Workout mode off (walking)]
1
Start walking.
Note: In order to avoid counting steps that are not part of a walk,
the unit does not display the step count for the first
4 seconds of walking. If you continue walking for more
than 4 seconds, it displays the step count for the first
4 seconds and then continues to count.
2 After you walk, press to read the data (refer to Chapter
7 “Checking the measurement result”).
To ensure an accurate step count, be sure to read “Cases
where the unit may not be able to count steps accurately” in
Chapter 7.2 before using the unit.
HJA-300-E_A_M.book Page 9 Monday, February 22, 2010 12:02 PM