Operation Manual

18
Note: If a malfunction has occurred and you need to repair your
unit, all settings and measurement results are deleted. We
recommend you to record measurement results.
Physical Activity and Public Health in Older Adults (M. E. Nelson;
et al.)
ACSM/AHA Recommendation; Circulation 2007;116:1094-1105
Physical Activity and Public Health (W. L. Haskell; et al.)
Update: ACSM/AHA Recommendation; Circulation
2007;116:1081-1093
Nothing is
displayed.
Polarities of
battery (+ and -)
aligned in wrong
directions.
Insert battery in correct
alignment (refer to
Chapter 9.1).
Battery weak or
exhausted.
Insert a new 3V lithium
battery type CR2032
(refer to Chapter 9.1).
Energy saving
function active.
Press either of ,
or
(refer to Chapter
7.1).
The distance
display is not
correct.
The stride length
setting is not
correct.
Adjust the stride length
(refer to Chapter 6.3).
Displayed values
are incorrect.
The unit is
attached
incorrectly.
Follow instructions (refer
to Chapter 6.2).
You are walking
at inconsistent
pace.
Cases where the unit may
not be able to count steps
accurately (refer to
Chapter 7.2).
Settings are
wrong.
Change settings (refer to
Chapter 5.1).
“Err” is displayed.
A malfunction
has occurred.
Remove the battery then
insert it again (refer to
Chapter 9.1).
The display is unusual or the buttons
do not operate normally.
Remove the battery then
insert it again (refer to
Chapter 9.1).
Phenomenon Cause Rectification
HJA-300-E_A_M.book Page 18 Monday, February 22, 2010 12:02 PM