HEM-705CP-IM-US 7/19/05 9:26 AM Page 1 R INSTRUCTION MANUAL ENGLISH ESPAÑOL Automatic Blood Pressure Monitor with Printer Model HEM-705CP
HEM-705CP-IM-US 7/19/05 9:26 AM Page 2 TITLE TABLE OF CONTENTS TITLE Before Using the Monitor Introduction ........................................................................................ 3 Important Safety Notes ....................................................................... 4 Before Taking a Measurement ........................................................... 5 Operating Instructions Know Your Unit ..................................................................................
HEM-705CP-IM-US 7/19/05 9:26 AM Page 3 INTRODUCTION Thank you for purchasing the Omron® HEM-705CP Intellisense® Automatic Blood Pressure Monitor with Printer Fill in for future reference DATE PURCHASED: ______ SERIAL NUMBER: ________ Staple your purchase receipt here. Your new digital blood pressure monitor uses the oscillometric method of blood pressure measurement. This means the monitor detects your blood’s movement through your brachial artery and converts the movements into a digital reading.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 4 IMPORTANT SAFETY NOTES To assure the correct use of the product basic safety measures should always be followed including the precautions listed below: þ þ þ þ þ þ þ Read all information in the instruction book and any other literature included in the box before using the unit. Contact your physician for specific information about your blood pressure. Follow the instructions of your healthcare provider. Operate the unit only as intended.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 5 BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations: 1. Avoid eating, smoking, and exercising for 30 minutes before taking a measurement. Rest for at least 15 minutes before taking the measurement. 2. Stress raises blood pressure. Avoid taking measurements during stressful times. 3. Measurements should be taken in a quiet place. 4. Remove tight-fitting clothing from your left arm. 5.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 6 KNOWTITLE YOUR UNIT TITLE Main Unit: Heart Symbol AC Adapter Jack Adjust Date/Time Set Date/Time Systolic Blood Pressure Printer Jack Cuff Jack ON/OFF Button Diastolic Blood Pressure START Button Pulse Rate Date/Time Display Memory Button Components: Printer Printer Cover Printer Cable Plug Power/Operation Light Print Graph Paper Feed Print All Data Print Current Data/Stop Printing Arm Cuff Air Plug (Connects to Air Jack) Air Tube 6
HEM-705CP-IM-US 7/19/05 9:26 AM Page 7 TITLE BATTERY INSTALLATION/REPLACEMENT TITLE Main Unit: 1. Press the ▼ OPEN indicator on the battery cover and slide the cover off in the direction of the arrow. Printer Unit: 2. Install 4 “AA” size batteries so the + (positive) and (negative) polarities match the polarities of the battery compartment as indicated. 3. Replace the battery cover.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 8 TITLE CONNECTING THE PRINTER TITLE 1. Remove the printer cord from around the printer unit. 2. Connect the printer to the blood pressure monitor. Insert the cable plug with the indicator facing upward. CAUTION: Inserting the cable plug in any other position will damage the monitor.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 9 LOADING THE PRINTER PAPER This printer uses OMRON® thermal paper, part number 90TRP. Use only this thermal paper or thermal paper of similar size, width 38mm, roll diameter not to exceed 26mm. NOTE: For information on where to purchase printer paper visit our website at www.omronhealthcare.com or call customer service at 1-800-634-4350. 1. Open the printer cover in the direction as indicated by the arrow symbols in the illustration. 2.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 10 SETTING THE DATE AND TIME The Blood Pressure Monitor automatically stores up to 28 measurement values with the date and time. Set the monitor to the current date and time before taking a measurement for the first time. If the current date and time is not set, a default date and time will display. 1. SETTING THE YEAR When the batteries are installed, the 12:00 AM will display. Press and hold the SET button for 2 seconds to adjust the year.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 11 SETTING THE DATE AND TIME TITLE 3. SETTING THE MONTH Press the ADJUST button to advance by increments of one month. Press the SET button to set the current month. The day flashes on the display. 4. SETTING THE DAY Press the ADJUST button to advance by increments of one day. Press the SET button to set the current day. The hour flashes on the display. 5. SETTING THE HOUR Press the ADJUST button to advance by increments of one hour.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 12 TITLE TITLE APPLYINGTITLE THE ARM CUFF 1. Make sure the air plug is securely inserted in the main unit. R NITO E MO SUR RES OD P C BLO TI 11 A -7 M HEM AUTO EL MOD IC TOL SYS LIC STO DIA 2. Remove tight-fitting clothing from your upper arm. 3. Sit in a chair with your feet flat on the floor. Place your arm on a table so the cuff is level with your heart. APPLYING THE CUFF ON THE LEFT UPPER ARM 4. Put your arm through the cuff loop.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 13 APPLYINGTITLE THE ARM CUFF TITLE TITLE 5. Pull the cuff so the top and bottom edges are tightened evenly around your arm. 6. When the cuff is positioned correctly, press the sewn hook material FIRMLY against the pile side of the cuff. 7. Make certain the cuff fits snugly around your arm. The cuff should make good contact with your skin. NOTE: You should be able to fit your index finger between the cuff and your arm easily, so you can pull the cuff off and on. 8.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 14 TITLE TITLE TAKING A TITLE MEASUREMENT The monitor automatically determines your ideal inflation level. In rare circumstances when a higher inflation may be necessary, the monitor automatically re-inflates the cuff up to 30mmHg higher than the initial inflation and restarts the measurement. The monitor detects the pulse during inflation. Do not move your arm and remain still during the measurement. 1.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 15 TITLE TAKING A TITLE MEASUREMENT TITLE 4. When the measurement is complete, the arm cuff completely deflates. Your blood pressure and pulse rate are displayed. 5. Press the ON/OFF button to turn the monitor off. NOTE: The monitor will automatically turn off after five minutes.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 16 TITLE USING THE MEMORY TITLE FUNCTION TITLE Every time you complete a measurement the monitor stores the blood pressure and pulse rate in the memory. The Blood Pressure Monitor automatically stores up to 28 measurement values. When 28 sets of measurement values are stored in the memory, the oldest record is deleted to save the most recent measurement values. TO DISPLAY THE MEASUREMENT VALUES The date and time is alternately displayed with the measurement values.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 17 USING TITLE THE PRINTER TITLE The HEM-705CP printer unit has the capability to print all the of measurement values stored in the memory of the Blood Pressure Monitor. NOTES: • The correct date and time must be set up on the monitor before taking a reading. If the date and time is not set, the numerical values will not appear on the print out. • The printer unit must be connected to the monitor. The monitor does not have to be ON to operate the printer unit.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 18 TITLE USING TITLE THE PRINTER 2. TO PRINT ALL THE MEASUREMENT VALUES Press the ALL DATA button. The numeric printout will list all of the readings stored in the memory starting with the oldest reading to the most recent reading followed by the average of all the stored readings. The stored data will print as illustrated in the following example: Systolic Reading Column Month(s) Date Time/Hour 3-6 D. T.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 19 USING TITLE THE PRINTER TITLE 3. TO PRINT A GRAPH OF ALL MEASUREMENT VALUES Press the GRAPH button. The graph will list all of the readings stored in the memory. The stored data will print as illustrated in the following example: Month(s) 3-6 50 100 150 If reading is lower than 50 mmHg or higher than 200 mmHg, (3) will appear.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 20 CARE ANDTITLE MAINTENANCE TITLE To keep your digital blood pressure monitor in the best condition and protect the unit from damage follow the directions listed below: • Keep the monitor in the storage case when not in use. • Do not forcefully bend the arm cuff or air tube. Do not fold tightly. • Clean the monitor with a soft dry cloth. Do not use any abrasive or volatile cleaners. Do not attempt to clean the cuff.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 21 TITLE ERROR TITLE INDICATORS TITLE SYMBOL CAUSE CORRECTION Remove the arm cuff. Refer to “Applying the arm cuff” on page 12. Wait 2-3 minutes. Take another measurement. Monitor did not detect pulse rate Cuff under-inflated Remove the arm cuff. Read “Taking a Measurement” on page 14. Wait 2-3 minutes. Take another measurement. Cuff over-inflated Replace the four batteries. Refer to page 7 for battery installation.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 22 TITLE TITLE TITLE TROUBLESHOOTING TIPS PRINTER UNIT: PROBLEM No power. CAUSES Worn batteries Replace all 4 "AA" batteries. Reference page 7. Incorrect battery installation Printer not connected No data will print. Cable plug not inserted correctly or damaged. No measurement values are stored in the memory Not all data stored in Worn batteries. the memory will print. Check the battery installation or proper placement of the battery polarities.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 23 QUICK REFERENCE GUIDE To ensure a reliable reading, avoid eating, smoking, and exercising for 30 minutes before taking a measurement. You should try to measure your blood pressure at the same time each day. Avoid taking measurements during stressful times. 1. Remove any tight-fitting clothing from your upper arm. 2. Sit in a chair with your feet flat on the floor and place your arm on a table so the cuff is at the same level as your heart. 3.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 24 QUICK REFERENCE GUIDE 5. Press the ON/OFF button. Display symbols appear. 6. Press the START button. The cuff starts to inflate automatically. START Remain still and do not talk during the measurement. NOTE: To stop the inflation or measurement, push the START/STOP button. The monitor will stop inflating, start deflating, and will turn off. 7. When the measurement is complete, the arm cuff completely deflates.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 25 TITLE TITLE FCC STATEMENT TITLE Note: POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only) This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 26 TITLE TITLE WARRANTY Your HEM-705CP, IntelliSense Automatic Blood Pressure Monitor, excluding the monitor cuff, is warranted to be free from defects in materials and workmanship appearing within 5 years from the date of purchase, when used in accordance with the instructions provided with the monitor.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 27 SPECIFICATIONS TITLE TITLE MAIN UNIT: Model: Display: Measurement Range: Accuracy/Calibration: Inflation: Deflation: Rapid Pressure Release: Pressure Detection: Measurement Method: Pulse Wave Detection: Power Source: Battery Life: Operating Temperatures/Humidity: Storage Temperatures/Humidity: Main Unit Weight: Main Unit Dimensions: Cuff Dimensions: Cuff Circumference: Contents: Optional Accessories: Sold Seperately UPC Code: HEM-705CP LCD Digital Display Pressur
HEM-705CP-IM-US 7/19/05 9:26 AM Page 28 Made in China Manufactured by OMRON Distributed by: OMRON HEALTHCARE, INC. 1200 Lakeside Drive Bannockburn, Illinois 60015-1243 www.omronhealthcare.com © 2005 OMRON HEALTHCARE, INC.