User Guide

13
4.Using the Monitor
EN
5. Pull the cuff so that the top and bot-
tom edges are tightened evenly
around your arm.
6. When the cuff is positioned correctly,
close the fabric fastener FIRMLY.
Notes:
Make certain the cuff fits snugly around your arm.
The cuff should make good contact with your skin. You should
be able to fit your index finger between the cuff and your arm
easily, so you can pull the cuff off and on.
Make sure that there are no kinks in the air tubing.
Taking measurements on the right arm
Please note the following points
when applying the cuff to your right
arm. Apply the cuff so that the air
tube is at the side of your elbow.
Notes:
Be careful not to rest your arm on the air tube, or otherwise
restrict the flow of air to the cuff.
Apply the arm cuff so that no part of the cuff is positioned over
the elbow joint. The cuff should be 1 to 2 cm above the elbow.