HEM-7300-WE_A_M01_100830.pdf HEM-7300-WE_en (main).
HEM-7300-WE_main.book 2 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 Contents Before using the unit Introduction ................................................................................ 3 Important Safety Information .................................................... 4 1. Overview ............................................................................... 6 2. Preparation ......................................................................... 10 2.1 Installing/Replacing the Batteries....................
HEM-7300-WE_main.book 3 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 Before using the unit Introduction Thank you for purchasing the OMRON MIT Elite Upper Arm Blood Pressure Monitor. The OMRON MIT Elite is a fully automatic blood pressure monitor, operating on the oscillometric principle. It measures your blood pressure and pulse rate simply and quickly. For comfortable controlled inflation without the need for pressure pre-setting or re-inflation the device uses its advanced “IntelliSense” technology.
HEM-7300-WE_main.book 4 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 Important Safety Information Important Safety Information Consult your doctor during pregnancy, arrhythmia and arteriosclerosis. Please read this section carefully before using the unit. Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. (General Usage) • Always consult your doctor. Self-diagnosis of measurement results and selftreatment are dangerous.
HEM-7300-WE_main.book 5 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 Important Safety Information • Do not use the AC adapter if the unit or the power cord is damaged. Turn off the power and unplug the power cord immediately. (Battery Usage) • If battery fluid should get on your skin or clothing, immediately rinse with plenty of clean water. • Use only four “AAA” alkaline batteries with this unit. Do not use other types of batteries. • Do not insert the batteries with their polarities incorrectly aligned.
HEM-7300-WE_main.book 6 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 1.Overview 1. Overview Main unit F A B E D C G A. B. C. D. E. 6 Air jack Date/time setting button ( ) O/I START button Memory button ( ) AC adapter jack (for optional AC adapter) F. Display G.
HEM-7300-WE_main.book 7 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 1.Overview Arm Cuff H I J H. Arm cuff (Medium cuff: arm circumference 22-32 cm) I. Air tube J.
HEM-7300-WE_main.book 8 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 1.Overview Display K L M O Q P T R V K. Systolic blood pressure L. Diastolic blood pressure M. Heartbeat symbol 1. Flashes during measurement 2. If flashing after measurement complete indicates blood pressure out of recommended range N. Deflation symbol O. Memory symbol Displayed when viewing values stored in memory P. Average value symbol Displayed when viewing value for the last three measurements Q. Battery low symbol R.
HEM-7300-WE_main.book 9 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 1.Overview Package contents W W. Storage case X.
HEM-7300-WE_main.book 10 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 2.Preparation 2. Preparation 2.1 Installing/Replacing the Batteries 1. Turn the main unit upside down. 2. Slide the battery cover in the direction of the arrow while pressing the ribbed part of the cover. 3. Install or replace four “AAA” size batteries so that the + (positive) and - (negative) polarities match the polarities indicated on the battery compartment. 4. Put the battery cover back in place.
HEM-7300-WE_main.book 11 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 2.Preparation Battery Life & Replacement If the battery low symbol ( ) appears on the display, replace all four batteries at the same time. - When the battery low symbol ( ) starts to blink, you will still be able to use the unit for a short while. You should replace the batteries with new ones ahead of time. - When the symbol ( ) remains lit, the batteries are exhausted. You should replace the batteries with new ones at once.
HEM-7300-WE_main.book 12 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 2.Preparation 2.2 Setting the Date and Time Your blood pressure monitor automatically stores up to 90 measurements values with the date and time. To make use of the memory and average values functions: • Set the unit to the correct date and time before taking a measurement for the first time. • If the batteries have been removed for more than 30 seconds, the Date/Time setting will need to be set. 1.
HEM-7300-WE_main.book 13 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 2.Preparation 3. Press the Date/time setting button ( ) to confirm the setting when the desired number appears on the display. The year is set and the month digits flash on the display. 4. Repeat steps 2 and 3 to set the month. The month is set and the day digits flash on the display. EN 5. Repeat steps 2 and 3 to set the day. The day is set and the hour digits flash on the display.
HEM-7300-WE_main.book 14 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 2.Preparation 6. Repeat steps 2 and 3 to set the hour. The hour is set and the minutes digits flash on the display. 7. Repeat steps 2 and 3 to set the minutes. The minutes settings is set. Press the Date/time setting button ( ) to turn the monitor off. When adjusting the date and time, press the Date/time setting button ( ) to turn the monitor on, follow the steps above, and press the O/I START button to turn the monitor off.
HEM-7300-WE_main.book 15 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 Operating instructions 3.Using the Unit 3. Using the Unit 3.1 How to Sit Correctly When Taking a Measurement You can take a measurement on either your left or right arm. Notes: • Measurements should be taken in a quiet place and you should be in a relaxed, seated position. Make sure that the room is not too hot or cold. • Avoid eating, drinking alcohol, smoking, or exercising for at least 30 minutes before taking a measurement.
HEM-7300-WE_main.book 16 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit Notes: • Correct posture during measurement is necessary to get accurate results. • You should also try to measure your blood pressure at the same time each day. (Within 1 hour after waking up is recommended.
HEM-7300-WE_main.book 17 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit 3.2 Applying the Arm Cuff Notes: • Be sure to wrap the arm cuff correctly so that you get accurate results. • Measurements can be taken in light clothing. However, please remove thick clothes, such as sweaters, before taking a reading. • You can take a measurement on either your left or right arm.
HEM-7300-WE_main.book 18 ページ ２０１１年１１月１０日 3.Using the Unit 2. Put your left arm through the cuff loop. Note: If the cuff is not assembled, pass the end of the cuff furthest from the tubing through the metal D-ring to form a loop. The smooth cloth should be on the inside of the cuff loop.
HEM-7300-WE_main.book 19 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit 3. Position the arm correctly. 1) The air tube should run down the inside of your forearm and be in line with your middle finger. 2) The bottom of the cuff should be approximately 1 to 2 cm above your elbow. 3) Apply the cuff to your upper arm so that the coloured marker (blue arrow under tube) is centred on the middle of your inner arm and points down the inside of the arm.
HEM-7300-WE_main.book 20 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit 3.3 Taking a Reading 1. Press the O/I START button to turn on the unit. All symbols appear on the display. The cuff starts to inflate automatically. As the cuff inflates, the unit automatically determines your ideal inflation level. This unit detects the pulse during inflation. Do not move your arm and remain still until the entire measurement process is completed.
HEM-7300-WE_main.book 21 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit 3. Press the O/I START button to turn the unit off. Note: If you forget to turn the monitor off, it will automatically turn off after two minutes. Notes: • Self-diagnosis of measured results and treatment are dangerous. Please follow the instructions of your doctor. • Wait 2-3 minutes before taking another blood pressure measurement.
HEM-7300-WE_main.book 22 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit Using the Guest Mode The monitor stores measurement values for one user in the memory. The guest mode can be used to take a single measurement for another user. No measurement values are stored in the memory when the guest mode is selected. 1. Press and hold the O/I START button for 3 seconds. The Guest symbol ( the display. ) appears on 2. Release the O/I START button. The cuff starts to inflate automatically.
HEM-7300-WE_main.book 23 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit Important: • If your systolic or diastolic pressure is outside the standard range, the heartbeat symbol will blink when the measurement result is displayed. Recent research suggests that the following values can be used as a guide to high blood pressure for measurements taken at home. Systolic Blood Pressure Above 135 mmHg Diastolic Blood Pressure Above 85 mmHg This criteria is for home blood pressure measurement.
HEM-7300-WE_main.book 24 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit What is Irregular Heartbeat? Normal Heartbeat An irregular heartbeat is a heartbeat rhythm that varies by Pulse more than 25% from the average heartbeat rhythm detected while Blood pressure the unit is measuring the systolic Irregular Heartbeat and diastolic blood pressure.
HEM-7300-WE_main.book 25 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit 3.4 Using the Memory Function This unit has a memory capable of storing 90 sets of readings. Every time you complete the measurement, the unit automatically stores the blood pressure and pulse rate. If there are three readings within 10 minutes of the last reading, the average of the three readings is displayed. Note: When 90 sets of readings are stored in memory, the oldest set will be deleted to store a new set. 1.
HEM-7300-WE_main.book 26 ページ ２０１１年１１月１０日 木曜日 3.Using the Unit 2. While the average value is displayed, press the Memory button ( ) again. The result from the most recent measurement is displayed. The date and time are alternately displayed. Note: If your systolic or diastolic pressure is outside the standard range, the heartbeat symbol will blink when the measurement result is displayed. Refer to section 3.3.
HEM-7300-WE_main.book 27 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit 3. Press the Memory button ( ) repeatedly to cycle through the previous measurement results. Keep the button pressed down to cycle rapidly through the previous results. If the irregular heartbeat symbol was displayed at the time of a measurement, this is displayed when that result is displayed. 4. Press the O/I START button to turn the unit off.
HEM-7300-WE_main.book 28 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 3.Using the Unit To Delete All the Values Stored in Memory You cannot delete individual stored readings, all the readings in the unit will be deleted. 1. Press the Memory button ( ) to turn the monitor on. 2. Press the Memory button ( ) again. While holding the Memory button ( ), press the O/I Start button down for approximately 5 seconds until the digital display appears as it does in the illustration to the right. 3.
HEM-7300-WE_main.book 29 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 4.Quick Reference Guide 4. Quick Reference Guide If you are using this device for the first time, please read carefully chapter 3 of this instruction manual. To help ensure a reliable reading, avoid eating, drinking alcohol, smoking, or exercising for at least 30 minutes before taking a measurement. Note: Remove any tight-fitting clothing from your upper arm. 1.
HEM-7300-WE_main.book 30 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 Care and maintenance 5.Handling Errors and Problems 5. Handling Errors and Problems 5.1 Error Messages Error Display Blinks or appears continuously 30 Cause Remedy Movement during measurement Repeat measurement. Remain still and do not talk during measurement. Refer to section 3.3. Air plug disconnected. Insert the air plug securely. Refer to section 3.2. Arm cuff not applied correctly. Apply the arm cuff correctly. Refer to section 3.2.
HEM-7300-WE_main.book 31 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 5.Handling Errors and Problems Error Display Cause Device error. Remedy Contact your OMRON retail outlet or distributor. Refer to Chapter 8. Note: The irregular heartbeat symbol may also be displayed with error messages.
HEM-7300-WE_main.book 32 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 5.Handling Errors and Problems 5.2 Troubleshooting Problem The reading is extremely low (or high). Arm cuff pressure does not rise. Arm cuff deflates too soon. Cannot measure or readings are too high. The unit loses power during measurement. 32 Cause Remedy Arm cuff not applied correctly. Apply the arm cuff correctly. Refer to section 3.2. Movement or talking during measurement. Remain still and do not talk during measurement.
HEM-7300-WE_main.book 33 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 5.Handling Errors and Problems Problem Nothing happens when you press the buttons. Other problems. Cause Remedy The batteries are empty. Replace the batteries with new ones. The batteries have been inserted incorrectly. Insert the batteries with the correct (+/ -) polarity. Press the O/I START button and repeat measurement. If the problem continues, try replacing the batteries with new ones.
HEM-7300-WE_main.book 34 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 6.Maintenance and Storage 6. Maintenance and Storage Maintenance To protect your unit from damage, please observe the following: • Do not subject the main unit and cuff to extreme temperatures, humidity, moisture or direct sunlight. • Do not fold the cuff or tubing tightly. • Do not inflate the arm cuff over 299 mmHg. • Do not disassemble the unit.
HEM-7300-WE_main.book 35 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 6.Maintenance and Storage • Do not carry out any repairs yourself. If a defect occurs or you have doubts about the correct functioning of the device, consult your authorised OMRON dealer or the OMRON Customer Service. Storage Keep the unit in its storage case when not in use. 1. Unplug the air tube from the air jack. 2. Gently fold the air tube into the arm cuff. Note: Do not bend the air tube excessively. 3.
HEM-7300-WE_main.book 36 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 7.Optional Parts 7. Optional Parts Medium Arm Cuff Large Arm Cuff Arm circumference 22 - 32 cm Arm circumference 32 - 42 cm CM1-9997578-9 CL-MIT Elite 9999358-2 Note: CL1 cuff cannot be used for this device. AC Adapter Adapter-3094298-6 (Model: AC Adapter-E1600) Note: Q Adapter-1098336-8 and R Adapter-9997605-0 cannot be used for this device.
HEM-7300-WE_main.book 37 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 8.Technical Data 8.
HEM-7300-WE_main.book 38 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 8.Technical Data Important information regarding Electro Magnetic Compatibility (EMC) With the increased number of electronic devices such as PC’s and mobile (cellular) telephones, medical devices in use may be susceptible to electromagnetic interference from other devices. Electromagnetic interference may result in incorrect operation of the medical device and create a potentially unsafe situation.
HEM-7300-WE_main.book 39 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 9.Some Useful Information about Blood Pressure 9. Some Useful Information about Blood Pressure What is Blood Pressure? Blood pressure is a measure of the force of blood flowing against the walls of the arteries. Arterial blood pressure is constantly changing during the course of the heart’s cycle. The highest pressure in the cycle is called the Systolic Blood Pressure; the lowest is the Diastolic Blood Pressure.
HEM-7300-WE_main.book 40 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 9.Some Useful Information about Blood Pressure Upper curve: systolic blood pressure Lower curve: diastolic blood pressure 200 mmHg 150 100 50 6 12 18 24 Time of day Example: fluctuation within a day (male, 35 years old) Classification of Blood Pressure by the World Heath Organization The World Health Organization (WHO) and the International Society of Hypertension (ISH) developed the Blood Pressure Classification shown in this figure.
HEM-7300-WE_main.book 41 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 9.
HEM-7300-WE_main.book 42 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分 9.Some Useful Information about Blood Pressure Manufacturer OMRON HEALTHCARE Co., Ltd. 53, Kunotsubo, Terado-cho, Muko, Kyoto, 617-0002 JAPAN EU-representative OMRON HEALTHCARE EUROPE B.V. Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS www.omron-healthcare.com Production facility OMRON (DALIAN) CO., LTD. Dalian, CHINA OMRON HEALTHCARE UK LTD. Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.
