User Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. INTENDED USE
- 3. SAVE THESE INSTRUCTIONS
- 4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS
- 5. HOW POCKET PAIN PRO WORKS
- 6. KNOW YOUR UNIT
- 7. ASSEMBLY STEPS
- 8. GET STARTED WITH YOUR THERAPY
- 9. HOW TO CONTROL AND REDUCE YOUR PAIN
- 10. CLEANING AND STORAGE
- 11. TROUBLESHOOTING
- 12. LIMITED WARRANTY
- 13. SPECIFICATIONS
- 14. FCC STATEMENT
- 15. GUIDANCE AND MANUFACTURER’S DECLARATION
31
Product Name OMRON Pocket Pain Pro
Model #
PM400 
REF
 HV-F013-Z2
Power Source DC 3 V (2 AAA alkaline batteries or 2 AAA 
manganese batteries)
Battery Life
New batteries (2 AAA alkaline batteries) will last for 
approx. 3 months (when used for 15 minutes a day, 
Steady Mode, max. intensity).
Frequency Approx. 1 to 108 Hz
PULSE Duration 100 μsec
Maximum Output Voltage 32 V (during 500 Ω load)
Power Control 10 intensity levels
Operating Temperature, Humidity 
(When using product)
50 °F to 104 °F (10 °C to 40 °C), 30 to 80 % RH 
(non-condensing), 700 to 1060 hPa
Storage Temperature, Humidity 32 °F to 104 °F (0 °C to 40 °C), 30 to 80 % RH
Transportation Temperature, 
Humidity, Air Pressure
-4 °F to 140 °F (-20 °C to 60 °C), 10 to 95 % RH, 
700 to 1060 hPa
Weight Approx. 2.6 oz (75 g) (incl. batteries)
Outer Dimension Approx. 3” (W) X 2.8” (H) X 0.9” (D) (75 X 70 X 
22 mm)
Classication of ME equipment Internally powered
IP classication IP 22
Operation Mode Continuous operation
Applied Part Type BF (Pads)
Durable period (Service Life) Device: 5 years
Pad: 150 uses
NOTE: 
•These specications are subject to change without notice.
  •This OMRON product is produced under the strict quality system of OMRON 
HEALTHCARE Co. Ltd., Japan.
  Designed for a minimum of 5 years life expectancy.
IP classification is degrees of protection provided by enclosures in accordance with IEC 
60529. This device is protected against solid foreign objects of diameter 12.5 mm such as 
a nger and greater, and against oblique falling water drops which gives trouble to normal 
operation.
13. SPECIFICATIONS










