Operation Manual

2. Preparation

2. Push the button to confirm.

Blue light will flash.

3. Press the O/I START button to save settings and turn the

monitor off.

Resetting to the Default Setting

The positioning indicator is set “on1”, the wrist for measurement is set “ ”, and the buzzer is set

“on1” as default.

To reset to the default setting, press and hold down the SET button while in the setting mode,

then press the O/I START button simultaneously for more than 2 seconds.

HEM-6052-E_B_M_main.book Page 10 Monday, April 19, 2010 11:28 AM