Operation Manual

3. Using the Unit
EN
13
3.3 Taking a Reading
Notes:
• This section is the example for the measurement with the default setting. To change the
setting refer to
section 2.3.
• To cancel a measurement, press the O/I START button at any time during measurement.
• Remain still while taking a measurement.
1. Select your User ID.
Always use the same user ID when taking a measurement.
The unit stores the measurement values in the selected user ID memory.
Notes:
• If “GUEST” is selected, A or B will not be displayed.
• If “GUEST” is selected, the measurement results are not stored in the memory.
User A User B
HEM-6052-E_B_M_main.book Page 13 Monday, April 19, 2010 11:28 AM