Operation Manual

2. Preparation
6
2.2 Setting the Date and Time
1. Set the monitor to the correct date and time before taking
a measurement for the first time.
Press the
button.
2. Press the O/I START button to turn the monitor off.
Notes:
• To reset the date and time, hold down the button while the power is off.
• If the batteries have been removed for 30 seconds or more, the date and time setting will
need to be reset.
1)
2)
Push the button to
change.
• Hold down to advance
the digit rapidly.
Push the button to
confirm.
Next setting appears.
Year
Month
Day
Hour
Minute
HEM-6052-E_B_M_main.book Page 6 Monday, April 19, 2010 11:28 AM