Wrist Blood Pressure Monitor Model R2 • Instruction Manual • Mode d’emploi • Gebrauchsanweisung • Manuale di istruzioni • Manual de instrucciones • Gebruiksaanwijzing • EN FR DE IT ES NL RU AR IM-HEM-6113-E(V)-02-10/2011 5330293-3B
Contents Introduction ..................................................... 3 Important Safety Information ......................... 4 1. Overview ..................................................... 6 2. Preparation ................................................. 9 2.1 Installing/Replacing the Batteries ............ 9 3. Using the Unit ........................................... 11 3.1 Applying the Wrist Cuff .......................... 11 3.2 Correct Posture ..................................... 13 3.
Introduction Thank you for purchasing the OMRON R2 Wrist Blood Pressure Monitor. This remarkable, compact and easy to use instrument is ideal for people who frequently monitor their own blood pressure. The small, pre-formed wrist cuff is very convenient and easy to apply. With a push of a button the OMRON Wrist Blood Pressure Monitor measures your blood pressure and pulse and displays the reading on a clear digital panel. Perfect for quick, easy readings at home, at work, and while travelling.
Important Safety Information Consult your doctor prior to using in pregnancy or if diagnosed with arrhythmia or arteriosclerosis. Please read this section carefully before using the unit. Warning: • Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. (General Usage) • Always consult your doctor. Self-diagnosis of measurement results and self-treatment are dangerous.
Important Safety Information (Battery Usage) • If battery fluid should get on your skin or clothing, immediately rinse with plenty of clean water. • Use only two “AAA” alkaline batteries with this unit. Do not use other types of batteries. • Do not insert the batteries with their polarities incorrectly aligned. • Replace old batteries with new ones immediately. Replace both batteries at the same time. • Remove the batteries if the unit will not be used for three months or more.
1. Overview Main Unit C A D E B A. Display B. Battery compartment cover 6 C. Wrist cuff D. O/I START button E.
1.Overview Display F G J H K L I F. Systolic blood pressure G. Diastolic blood pressure H. Memory symbol (Displayed when viewing values stored in memory) I. Battery low symbol J. Heartbeat symbol 1. Flashes during measurement 2. If flashing after measurement completed or when viewing results stored in the memory, indicates blood pressure out of recommended range* K. Pulse L.
1.Overview Package contents N M M. Two “AAA” alkaline (LR03) batteries • Blood pressure pass • Blood Pressure Monitor unit 8 N.
2. Preparation 2.1 1. Installing/Replacing the Batteries Remove the battery compartment cover by pulling it off in the direction of the arrow. 1) Push the hook on the bottom of the battery cover. 2) Pull the cover off the main unit. 2 1 2. Insert two identical 1.5V “AAA” alkaline (LR03) batteries in the battery compartment. EN Make sure their polarity (+/-) is aligned with the polarity (+/-) as indicated in the battery compartment.
2.Preparation 3. Put the battery cover back in place. Note: The measurement values continue to be stored in memory even after the batteries are replaced. Battery Life & Replacement If the battery low symbol ( ) appears on the display, replace both batteries at the same time. - When the battery low symbol ( ) starts to blink, you will still be able to use the unit for a short while. You should replace the batteries with new ones as soon as possible.
3. Using the Unit 3.1 Applying the Wrist Cuff You can take a measurement on either your left or right wrist. Notes: • You can take a measurement on either your left or right arm. The blood pressure can differ between the right arm and the left arm and therefore also the measured blood pressure values can be different. Omron recommends to always use the same arm for measurement. If the values between the two arms differ substantially, please check with your physician which arm to use for your measurement.
3.Using the Unit 2. Hold the bottom part of the wrist cuff and wrap it around the wrist while pulling so that it fits comfortably. Notes: • Unless the wrist cuff is wrapped securely around the wrist, it will not be possible to take correct measurements. • If you have a slender wrist, the cuff may feel slightly loose. However, this will not affect measurement results and you should not force the cuff to fit. • The remaining part of the wrist cuff can be conveniently folded back out of the way.
3.Using the Unit 3.2 Correct Posture Correct posture during measurement helps you get accurate results. You should also try to measure your blood pressure at the same time each day. Notes: • Do not take measurement after bathing, drinking alcohol, or exercising. • Do not move or talk during measurement. Sit comfortably with your back straight, hold your arm across your chest and relax. Position your arm so that the unit is at the same level as your heart.
3.Using the Unit 3.3 1. Taking a Reading Press the O/I START button to start measurement. The wrist cuff will start to inflate automatically after the power is turned on. 2. After the unit has detected your blood pressure and pulse rate, the cuff automatically deflates and your blood pressure and pulse rate are displayed. Notes: • Sit still and do not talk or move until the measurement is completed. • Keep the unit at heart height until the measurement is completed.
3.Using the Unit 3. Check the measurement result. The unit automatically stores blood pressure and pulse rate into its memory. Refer to “3.4 Using the Memory Function”. 4. Undo the cuff and remove the unit. 5. Press the O/I START button to turn off the unit. If you forget to turn off the unit, it will shut itself off automatically after two minutes.
3.Using the Unit 3.4 Using the Memory Function This unit has a memory capable of storing 30 sets of readings. Every time you complete the measurement, the unit automatically stores blood pressure and pulse rate. Note: When 30 sets of readings are stored in memory, the oldest set will be deleted to store a new set. To View Previous Readings Stored in Memory 1. Press the MEM button to view readings stored in memory from the most recent to the oldest.
3.Using the Unit To Delete All Values in Memory You cannot delete the stored readings partially, all the readings in the unit will be deleted. To delete stored readings, first press the MEM button. Then while holding it down, press the O/I START button simultaneously for about 2-3 seconds. All readings will then be deleted. Note: After the reading have been deleted, the screen to the right of the illustration above appears and Memory symbol flashes. Release the buttons to return to the memory display.
4. Quick Reference Guide Use this as a quick reference guide only. If you are using this device for the first time, please read carefully Chapter 3 of this Instruction Manual. Avoid eating, drinking, smoking, or exercising for at least 30 minutes before taking a measurement. You should also try to measure your blood pressure at the same time each day. It is recommended that you check your blood pressure at least twice a day, in the morning before breakfast and in the evening before going to bed.
5. Handling Errors and Problems 5.1 Error Messages Error Symbol Cause Cuff over inflated. Movement during measurement. Correction Repeat measurement. Remain still and do not move during measurement. (Refer to “3.3 Taking a Reading”.) The wrist cuff is not fastened securely. Carefully read and repeat the steps listed under “3.1 Applying the Wrist Cuff”. An E mark with a code/number indicates the device has a hardware failure. Consult your OMRON retail outlet or distributor.
5.Handling Errors and Problems 5.2 Troubleshooting Symptom Cause Are you holding the wrist cuff at heart level? Measure while in the correct posture. (Refer to “3.2 Correct Posture”.) Is the cuff wrapped snugly around the wrist? Wrap the cuff correctly. (Refer to “3.1 Applying the Wrist Cuff”.) Are your arms and shoulders tense? Relax and try taking the measurement again. (Refer to “3.3 Taking a Reading”.) Movement or talking during measurement. Remain still and do not talk during measurement.
5.Handling Errors and Problems Symptom Cause Correction The blood pressure is different each time. The reading is extremely low (or high). Blood pressure readings constantly vary with time of day and how relaxed you are. Take several deep breaths and try to remain relaxed before taking a measurement. The unit loses power during measurement. The batteries are drained. Replace the batteries with new ones. The batteries are drained. Replace the batteries with new ones.
6. Maintenance and Storage To protect your unit from damage, please avoid the following: • Subjecting your unit to extreme temperatures, humidity, or direct sunlight. • Washing the cuff or exposing the cuff or unit to water. • Disassembling the unit. • Subjecting the unit to strong shocks or vibrations. Dropping the Unit. • Cleaning the unit with volatile liquids. • • • • The unit should be cleaned with a soft, dry cloth. Use a soft, moistened cloth and soap to clean the cuff.
6.Maintenance and Storage Calibration and Service • The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service life. • It is generally recommended to have the unit inspected every two years to ensure correct functioning and accuracy. Please consult your authorised OMRON dealer or the OMRON Customer Service at the address given on the packaging or attached literature. • If the wrist cuff needs to be replaced have this done by an authorised expert.
7. Technical Data Product Description Model Display Measurement Measurement Range Memory Accuracy Inflation Deflation Power Source Battery Life Wrist Blood Pressure Monitor OMRON R2 (HEM-6113-E(V) / HEM-6113-E8(V)) LCD Digital Display Oscillometric method Pressure: 0 to 299 mmHg Pulse: 40 to 180 beats/min 30 Measurements Pressure: Within ±3 mmHg Pulse rate: Within ±5% of reading Automatic inflation by pump Automatic rapid deflation Two 1.
7.Technical Data • This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co. Ltd., Japan. The Core component for OMRON blood pressure monitors, which is the Pressure Sensor, is produced in Japan. • Disposal of this product and used batteries should be carried out in accordance with the national regulations for the disposal of electronic products. = Type B This device fulfils the provisions of EC directive 93/42/EEC (Medical Device Directive).
7.Technical Data Important information regarding Electro Magnetic Compatibility (EMC) With the increased number of electronic devices such as PC’s and mobile (cellular) telephones, medical devices in use may be susceptible to electromagnetic interference from other devices. Electromagnetic interference may result in incorrect operation of the medical device and create a potentially unsafe situation. Medical devices should also not interfere with other devices.
8. Some Useful Information about Blood Pressure What is Blood Pressure? Blood pressure is a measure of the force of blood flowing against the walls of the arteries. Arterial blood pressure is constantly changing during the course of the heart’s cycle. The highest pressure in the cycle is called the Systolic Blood Pressure; the lowest is the Diastolic Blood Pressure. Both pressure readings, the Systolic and Diastolic, are necessary to enable a doctor to evaluate the status of a patient’s blood pressure.
8.Some Useful Information about Blood Pressure Upper curve: systolic blood pressure Lower curve: diastolic blood pressure mmHg 200 150 100 50 6 12 18 24 Time of day Example: fluctuation within a day (male, 35 years old) Classification of Blood Pressure by the World Heath Organization The World Health Organization (WHO) and the International Society of Hypertension (ISH) developed the Blood Pressure Classification shown in this figure.
Manufacturer OMRON HEALTHCARE Co., Ltd. 53, Kunotsubo, Terado-cho, Muko, Kyoto, 617-0002 JAPAN EU-representative OMRON HEALTHCARE EUROPE B.V. Scorpius 33, 2132 LR Hoofddorp THE NETHERLANDS www.omron-healthcare.com Production facility OMRON HEALTHCARE MANUFACTURING VIETNAM CO., LTD. Binh Duong Province, VIETNAM OMRON HEALTHCARE UK LTD. Opal Drive, Fox Milne, Milton Keynes, MK15 0DG U.K. Subsidiary OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH John-Deere-Str. 81a, 68163 Mannheim GERMANY www.
Notes 30