User's Manual
Table Of Contents
- Modbus/TCP Communications
- 7-1 Outline
- 7-2 Message Formats
- 7-3 RF Communications Command Options
- 7-4 Communications Procedure
- 7-5 Commands
- 7-6 V780 Command Details
- 7-6-1 Single-access Communications Commands
- 7-6-2 Multiaccess Communications Commands
- 7-6-3 Modbus Expansion Communications Commands
- 7-6-4 Reader/Writer Control Commands
- 7-6-5 Reader/Writer Setting Commands: Network Settings
- 7-6-6 Reader/Writer Setting Commands: Communications Settings
- 7-6-7 Reader/Writer Setting Commands: Device Settings
- 7-6-8 Maintenance Commands: Device Information
- 7-6-9 Maintenance Commands: Log Information
- 7-6-10 Maintenance Commands: RF Communications Information
7 Modbus/TCP Communications
7 - 118
UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
• Error Response
Execution Examples
Execution with the Following Command Error Log in the Reader/Writer
TX: 000000000006FF03D8000061
RX: 0000000000C5FF03C2000201091F1EC0A80178000000041005000000000000000
0000001091E0AC0A801780000000320040000000000000000…00
Newest record -
1 in the com-
mand error log
--- ---
...
... ...
Newest record -7
in the command
error log
--- ---
Byte-0 Byte-1 Byte-2 Byte-3 Byte-4 Byte-5 Byte-6 Byte-7 Byte-8
Transaction identi-
fier
Protocol identifier Field length Unit
identifier
Function
code
Excep-
tion code
X X 0000 hex 0003 hex FF hex 83 hex 1 byte
Parameter Description
Exception code For details, refer to Exception Code on page 7-7 under 7-2-3 Response Format for
Error Completion on page 7-7.
Number of
records
2
Newest record
Time information: 09:31:30, IP address: 192.168.1.121, Command code: 0004 hex
(WRITE DATA), Error code: 1005 hex (command parameter error), Attached informa-
tion: None
Newest record - 1
Time information: 09:30:10, IP address: 192.168.1.120, Command code: 0003 hex
(READ DATA), Error code: 2004 hex (address error), Attached information: None
Parameter Description