User's Manual
Table Of Contents
- Modbus/TCP Communications
- 7-1 Outline
- 7-2 Message Formats
- 7-3 RF Communications Command Options
- 7-4 Communications Procedure
- 7-5 Commands
- 7-6 V780 Command Details
- 7-6-1 Single-access Communications Commands
- 7-6-2 Multiaccess Communications Commands
- 7-6-3 Modbus Expansion Communications Commands
- 7-6-4 Reader/Writer Control Commands
- 7-6-5 Reader/Writer Setting Commands: Network Settings
- 7-6-6 Reader/Writer Setting Commands: Communications Settings
- 7-6-7 Reader/Writer Setting Commands: Device Settings
- 7-6-8 Maintenance Commands: Device Information
- 7-6-9 Maintenance Commands: Log Information
- 7-6-10 Maintenance Commands: RF Communications Information
7 - 29
7 Modbus/TCP Communications
UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
7-6 V780 Command Details
7
7-6-1 Single-access Communications Commands
Note If the reception level is required, use GET RF TAG ADDITIONAL INFORMATION on page 7-121.
• Error Response
Execution Examples
Example 1: Locking the User Area of the RF Tag with a Password of 12345678 Hex
TX: 00000000000FFF1080000004080001000412345678
RX: 000000000006FF1080000004
Example 2: Unlocking the User Area
TX: 00000000000FFF1080000004080000000412345678
RX: 000000000006FF1080000004
Byte-0 Byte-1 Byte-2 Byte-3 Byte-4 Byte-5 Byte-6 Byte-7 Byte-8
Transaction identi-
fier
Protocol identifier Field length Unit
identifier
Function
code
Excep-
tion code
X X 0000 hex 0003 hex FF hex 90 hex 1 byte
Parameter Description
Exception code For details, refer to Exception Code on page 7-7 under Response Format for Error
Completion on page 7-7.