Instruction Manual

Safety Information
• Keep this device clean and free of potentially
flammable or reflective dust and swarf.
• DO NOT place body parts in or near the engraving
path.
• ALWAYS wear appropriate personal protective
equipment such as protective eyewear when
operating your laser. If this device is being used
on an open bed, it is also recommended to secure
the worksite or erect protective screens around the
laser path to prevent injury to passersby.
• DO NOT use this device with items too wide or long
for its rails.
• DO NOT assemble or disassemble this device without
proper training.
Contact Us
Maintenance
• Clean this device with a soft moist cloth to remove
any dust or debris that may accumulate. Allow time
for any moisture to air dry before further use.
Installation
1. Place this rotary axis on the workbed. Ensure that
the placement allows the laser head to move along
the full range of its X axis without obstruction.
2. Connect the rotary device’s connection to the Y-axis
port inside the engraver or the rotary axis port behind
your engraver.
Operation
1. Fix the position of the adjustable rollers by removing
the horizontal locking bolt, choosing an appropriate
length, and fixing the bolt back into place.
2. Fix the height of the adjustable rollers by removing the
vertical locking bolt, turning the height adjustment
knob until your desired height is achieved, and then
fixing the bolt back into place.
3. Use your engraver’s control panel or your engraving
software to add your design.
Specifications
Input Voltage
Rated Power
Product Dimensions
Distance between Rollers
Fixed Roller Height
Adjustable Roller Height
Net Weight
24 V
46 W
6×22.8×7 in. (15×58×18 cm)
0.4–15 in. (1–38 cm)
6 in. (15 cm)
6.1–7.9 in. (15.5–20 cm)
19.8 lb. (9 kg)
Thank you for choosing our products! If you have any questions or comments, contact us at
[e-mail] and we'll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate app on your
smartphone to scan the QR code to the right.
LRA-GL49-01 Rev. 24 Feb. 2022
Laser Engraving
Rotary Axis
V20220096
Fixed Rollers
Motor
Adjustable Rollers
Vertical Bolt
Horizontal Bolt
Height Adjustment Knob