User Instructions

5
B. Instructions for Landline Faceplate: ( SEE PHOTOS BELOW ) Remove insulation off the end of
the two (2) wires exposing 3/8” of copper wire to deliver the dial tone. Fasten one to the left
side and the other wire to the right side of the green removable dial tone adapter. After
installing wires to the adapter, check for dial tone on the handset, then proceed with installing
faceplate into red housing with the four (4) faceplate screws.
5. Installing Instruction Sign: Attach the instruction sign using the two (2) sign screws to the back
plate.
6. Testing Your 911 “Landline” Emergency Phone: Dial 911. When an emergency operator answers
verify the address identified on your ID card.