User Manual Owner manual

Hardware Setup

N300 WiFi ADSL2+ Modem Router (N300RM)

5. Connect a computer.

You can use an Ethernet cable or connect wirelessly.

• Use the yellow Ethernet cable to connect your computer to an Ethernet port on your

modem.

• Or connect wirelessly by using the preset wireless security settings on the label on

the bottom of the router

6. Open a browser

The first time that you connect to your modem, the browser automatically displays a modem

routerscreen to help you set up your Internet connection.

If this screen does not display, see the following section, Tips for Connecting to the

Modem Router on page 16.

If you already connected to the modem and used this screen, you are prompted to log in.

See Log In to the Modem Router on page 19.

7. Connect any additional wired computers to your modem router by inserting an Ethernet

cable from a computer into one of the three remaining LAN ports.

Note: To use the modem router on the same network as another router, you

need to change the Device Mode setting to Modem mode. See Change the

Device Mode on page 102.