User Manual Owner manual

Security Settings
58
N300 WiFi ADSL2+ Modem Router (N300RM)
5. Click Add Service to display the following screen:
6. In the Service Name field, type a descriptive service name.
7. In the Service User list, select Any (the default) to allow this service to be used by any
computer on the Internet. Otherwise, select Single address and enter the IP address of
one computer to restrict the service to a particular computer
.
8. Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
TCP/UDP
.
9. In the
Triggering Port field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
10. Enter the inbound connection port information in the Connection
Type, Starting Port, and
Ending Port fields.
11. Click Apply.
The service appears in the Port Triggering Portmap table.