Easy, Reliable & Secure Installation Guide Po w e rl i n e 200 Plus H o me N etwor k Adap ter (P L 2 0 0 P )
Trademarks Brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, On Networks reserves the right to make changes to the products described in this document without notice.
LED Descriptions Item Description Power LED • Solid green. The electrical power is on. • Blinking green. The adapter is in the process of setting up security. • Off. There is no electrical power. • Solid green. The Ethernet port is linked. • Off. There is no Ethernet connection. • Solid green. Link rate > 80 Mbps. • Solid amber. Link rate > 50 Mbps and < 80 Mbps. • Solid Red. Link rate < 50 Mbps. • Off. The adapter has not found any other compatible Powerline devices using the same encryption key.
Button Descriptions Ethernet port Security button Reset button Item Description Factory Reset button Press the Reset button for 1 second, then release it to return the Powerline adapter to its factory default settings. After you plug in your new AV adapter, press the Security button for 2 seconds, then press the Security button on one of the other AV adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes.
Install Your Powerline Adapter For each Powerline adapter you are adding to your existing Powerline network, do the following: 1. Plug each Powerline adapter into a power outlet. 2. Set up security on your Powerline adapter to add it to your existing Powerline network. Press the Security button for 2 seconds, then press the Security button on one of the other Powerline adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes.
3. Connect devices to your Powerline adapter. You can connect a device, such as a router or a computer, to the Ethernet port on the bottom of the Powerline adapter. Safety Information • • • • • For national approvals (approval schemes other than CB), relevant national standards for plug, socket-outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to national standards. AC input rating (NA): 100–125V, 0.
• • • • • Check the electrical current for any device plugged into the filtered AC socket. Do not exceed home and product outlet ratings and electrical requirements. The socket-outlet must be installed near the equipment and be easily accessible. Only power cords are allowed to be inserted into the filtered AC outlet; no other equipment with a direct plug-in is allowed. Power cord needs to be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area.
• DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached powerstrip. The device is not intended to be used with home appliances, such as air conditioners, power tools, space heaters, fans, hair dryers, ovens, or refrigerators.
Technical Support Thank you for selecting On Networks products. After installing your device, locate the serial number on the label of your product, and use it to register your product at http://www.on-networks.com/register. Registration is required to use our telephone support service. For product updates and web support, go to http://www.on-networks.com/products/powerline. For complete DoC, visit http://www.on-networks.com/doc.
August 2012