Datasheet

ManualsBrandsON Semiconductor ManualsDiodesZener Diode 5W 9.1V 7.5uA Surmetic 40

September, 2005 − Rev. 6

1 Publication Order Number:

1N5333B/D

1N5333B Series

Preferred Device

5 Watt Surmetict 40

Zener Voltage Regulators

This is a complete series of 5 Watt Zener diodes with tight limits and

better operating characteristics that reflect the superior capabilities of

silicon−oxide passivated junctions. All this in an axial lead,

transfer−molded plastic package that offers protection in all common

environmental conditions.

Features

• Zener Voltage Range − 3.3 V to 200 V

• ESD Rating of Class 3 (>16 kV) per Human Body Model

• Surge Rating of up to 180 W @ 8.3 ms

• Maximum Limits Guaranteed on up to Six Electrical Parameters

• Pb−Free Packages are Available

Mechanical Characteristics

CASE:

Void free, transfer−molded, thermosetting plastic

FINISH: All external surfaces are corrosion resistant and leads are

readily solderable

MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES:

230°C, 1/16 in. from the case for 10 seconds

POLARITY: Cathode indicated by polarity band

MOUNTING POSITION: Any

MAXIMUM RATINGS

Rating Symbol Value Unit

Max. Steady State Power Dissipation

@ T

= 75°C, Lead Length = 3/8 in

Derate above 75°C

mW/°C

Operating and Storage

Temperature Range

, T

stg

−65 to +200 °C

Maximum ratings are those values beyond which device damage can occur.

Maximum ratings applied to the device are individual stress limit values (not

normal operating conditions) and are not valid simultaneously. If these limits are

exceeded, device functional operation is not implied, damage may occur and

reliability may be affected.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

http://onsemi.com

AXIAL LEAD

CASE 017AA

PLASTIC

Cathode Anode

MARKING DIAGRAM

A = Assembly Location

1N53xxB = Device Number

(Refer to Tables on Pages 3 & 4

YY = Year

WW = Work Week

G = Pb−Free Package

(Note: Microdot may be in either location)

53xxB

YYWWG

Device Package Shipping

†

ORDERING INFORMATION

1N53xxB Axial Lead 1000 Units/Box

1N53xxBRL Axial Lead 4000/Tape & Reel

Preferred devices are recommended choices for future use

and best overall value.

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specification

Brochure, BRD8011/D.

1N53xxBG Axial Lead

(Pb−Free)

1000 Units/Box

1N53xxBRLG Axial Lead

(Pb−Free)

4000/Tape & Reel

Summary of content (8 pages)

PAGE 1
N5333B Series Preferred Device 5 Watt Surmetict 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon−oxide passivated junctions. All this in an axial lead, transfer−molded plastic package that offers protection in all common environmental conditions. Features • • • • • http://onsemi.com Cathode Anode Zener Voltage Range − 3.
PAGE 2
1N5333B Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max @ IF = 1.
PAGE 3
1N5333B Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max @ IF = 1.0 A for all types) Zener Impedance (Note 2) Leakage Current @ IZT ZZT @ IZT IR @ VR Zener Voltage (Note 2) VZ (Volts) ZZK @ IZK IZK IR (Note 3) DVZ (Note 4) IZM (Note 5) Device† (Note 1) Device Marking Min Nom Max mA W W mA mA Max Volts A Volts mA 1N5333B, G 1N5334B, G 1N5335B, G 1N5336B, G 1N5337B, G 1N5333B 1N5334B 1N5335B 1N5336B 1N5337B 3.14 3.42 3.71 4.09 4.47 3.3 3.6 3.9 4.
PAGE 4
1N5333B Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max @ IF = 1.0 A for all types) Zener Impedance (Note 7) Leakage Current @ IZT ZZT @ IZT IR @ VR Zener Voltage (Note 7) VZ (Volts) ZZK @ IZK IZK IR (Note 8) DVZ (Note 9) IZM (Note 10) Device† (Note 6) Device Marking Min Nom Max mA W W mA mA Max Volts A Volts mA 1N5363B, G 1N5364B, G 1N5365B, G 1N5366B, G 1N5367B, G 1N5363B 1N5364B 1N5365B 1N5366B 1N5367B 28.5 31.35 34.2 37.05 40.
PAGE 5
( θ JL, JUNCTION-TO-LEAD THERMAL RESISTANCE °C/W) 1N5333B Series 40 30 20 L 10 0 L PRIMARY PATH OF CONDUCTION IS THROUGH THE CATHODE LEAD 0 0.2 0.4 0.6 0.8 L, LEAD LENGTH TO HEATSINK (INCH) 1 Figure 1. Typical Thermal Resistance 300 200 10 θVZ , TEMPERATURE COEFFICIENT (mV/°C) @ I ZT θVZ , TEMPERATURE COEFFICIENT (mV/°C) @ I ZT TEMPERATURE COEFFICIENTS 8 100 6 4 2 RANGE 0 −2 3 4 7 5 6 8 VZ, ZENER VOLTAGE @ IZT (VOLTS) 9 RANGE 50 30 20 10 5 0 10 Figure 2.
PAGE 6
θ JL (t, D), TRANSIENT THERMAL RESISTANC JUNCTION-TO-LEAD (°C/W) 1N5333B Series 20 10 D = 0.5 5 D = 0.2 2 1 0.5 PPK t1 D = 0.1 t2 D = 0.05 D = 0.01 DUTY CYCLE, D = t1/t2 SINGLE PULSE D TJL = qJL(t)PPK REPETITIVE PULSES D TJL = qJL(t, D)PPK NOTE: BELOW 0.1 SECOND, THERMAL NOTE: RESPONSE CURVE IS APPLICABLE NOTE: TO ANY LEAD LENGTH (L). D=0 0.2 0.00 1 0.00 5 0.01 0.05 0.1 0.5 1 5 10 20 50 100 t, TIME (SECONDS) Figure 4.
PAGE 7
1N5333B Series I Z , ZENER CURRENT (mA) 100 10 1 0.1 80 100 120 140 160 180 VZ, ZENER VOLTAGE (VOLTS) 200 220 Figure 9. Zener Voltage versus Zener Current VZ = 82 thru 200 Volts APPLICATION NOTE Since the actual voltage available from a given Zener diode is temperature dependent, it is necessary to determine junction temperature under any set of operating conditions in order to calculate its value.
PAGE 8
1N5333B Series PACKAGE DIMENSIONS SURMETIC 40, AXIAL LEAD CASE 017AA−01 ISSUE O NOTES: 1. CONTROLLING DIMENSION: INCH 2. LEAD DIAMETER AND FINISH NOT CONTROLLED WITHIN DIMENSION F. 3. CATHODE BAND INDICATES POLARITY B DIM A B D F K D K F INCHES MIN MAX 0.330 0.350 0.130 0.145 0.037 0.043 −−− 0.050 1.000 1.250 MILLIMETERS MIN MAX 8.38 8.89 3.30 3.68 0.94 1.09 −−− 1.27 25.40 31.75 A F K SURMETIC is a trademark of Semiconductor Components Industries, LLC (SCILLC).