Datasheet

CCRACGEVB
http://onsemi.com
23
APPENDIX I
Table 15. JUMPERS FUNCTION DEFINITION
Jumper Function
J1 Bypass Cap Drop Circuit
J2 Enable C1
J3 Enable C2
J4 Enable C3
J5 Enable C4
J6 Enable C5
J7 Enable Straight Dimmable Circuit
J8 Enable Chopper Circuit
J9 Enable Zener Diode for Cap Drop Circuit
J10 Enable Output Capacitors
J11 Enable CCR3 for all Circuits
J12 Enable CCR4 for all Circuits
J13 Enable CCR5 for all Circuits
J14 Enable CCR6 for all Circuits
J15 Allows Selection of R3 for Straight Dimmable Circuit
J16 Allows Selection of R4 for Straight Dimmable Circuit
J17 Allows CCR6 Current to be adjusted
J18 Bypass Inrush Current Limiter
J19 Bypass Straight Dimmable Adjustable Resistor
J20 Bypass Chopper FET
J21 Enable Chopper/Cap Drop Dimmable Circuit
J22 Bypass Chopper/Cap Drop Dimmable Circuit FET
J23 Enable parallel LED Strings (2 Strings of 3-5 LEDs in parallel)
J24 Enable Extended Straight LED String (6-10 in series)
J25 Bypass LEDs D14 and D15
J26 Enable single LED String or parallel LED String
J27 Bypass LEDs D19 and D20
J28 Bypass C7
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: 81−3−5817−1050
EVBUM2176/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative