User manual


 Copyright©JOY‐iT® www.JOY‐iT.net
KnownProblems/Solutions

UnfortunatelyitdoesoccurattimesthattheRAMmodulesgetloose,
Failure:DisplaydoesnotreactwhenswitchedonandthePCmaypeep.
Instructionstoeliminatethisfailure:
1. Removethepowercablefromthepowersupply
2. Thenpressthepowerswitchbuttonagain
3. Removethe
leftcasingcover(withtheventilationslits)
4. LocalisetheRAMmodules,theyareusuallyonthemainboardintheupperrightfield.
5. Nowtouchametalpartofthecasingtodischarge possiblestaticcharge.
ThePCmayotherwisebedamagedbystaticcharge!
6. RemovetheRAMmodulebypressingbothcatchesontherightandleftoftheRAMoutwards.
7. NowpresstheRAMmodulesbackintotheinserts,theyautomaticallycatchintotheRAMandlock
it.
8. Checkthatthecatches
arecorrectlylockedintotherecessesoftheRAM,ifthisisnotthecasethe
RAMhastobepressedfurtherintothememoryslot.
9. Reassemblethesidepanelandconnectthepowersupplycableagain.
Shouldthefailurenothavebeeneliminated,pleasecontactthedealerfrom
whomyouboughtthe
system.(seefollowingpage)

