Data Sheet

ManualsBrandsON Semiconductor ManualsBJTs & IGBTsIGBT ON Semiconductor FSB50250UTD SPM 23 ED 3-phase Logic, Schmitt trigger 500 V

FSB50250UTD Rev. C4

FSB50250UTD Motion SPM® 5 Series

January 2014

FSB50250UTD

Motion SPM

5 Series

Features

• UL Certified No. E209204 (UL1557)

• 500 V R

DS(on)

= 4.2 Max FRFET MOSFET 3-Phase

Inverter with Gate Drivers and Protection

• Built-In Bootstrap Diodes Simplify PCB Layout

• Separate Open-Source Pins from Low-Side MOSFETs

for Three-Phase Current-Sensing

• Active-HIGH Interface, Works with 3.3 / 5 V Logic,

Schmitt-trigger Input

• Optimized for Low Electromagnetic Interference

• HVIC for Gate Driving and Under-Voltage Protection

• Isolation Rating: 1500 V

rms

/ min.

• RoHS Compliant

Applications

• 3-Phase Inverter Driver for Small Power AC Motor

Drives

Related Source

• AN-9082 - Motion SPM5 Series Thermal Performance

by Contact Pressure

General Description

The FSB50250UTD is an advanced Motion SPM

module providing a fully-featured, high-performance

inverter output stage for AC Induction, BLDC and PMSM

motors. These modules integrate optimized gate drive of

the built-in MOSFETs (FRFET

technology) to minimize

EMI and losses, while also providing multiple on-module

protection features including under-voltage lockouts and

thermal monitoring. The built-in high-speed

HVIC requires only a single supply voltage and

translates the incoming logic-level gate inputs to the

high-voltage, high-current drive signals required to

properly drive the module's internal MOSFETs.

Separate open-source MOSFET terminals are available

for each phase to support the widest variety of control

algorithms.

Package Marking & Ordering Information

Device

Device Marking

Package Packing Type Quantity

FSB50250UTD FSB50250UTD SPM5N-023 Rail 15