Datasheet

ManualsBrandsON Semiconductor ManualsDiodesSchottky Diode, 8A, 35V, DPAK

November, 2012 − Rev. 11

1 Publication Order Number:

MBRD835L/D

MBRD835LG,

MBRD835LT4G,

SBRD8835LG,

SBRD8835LT4G

SWITCHMODE

Power Rectifier

DPAK Surface Mount Package

This SWITCHMODE power rectifier which uses the Schottky

Barrier principle with a proprietary barrier metal, is designed for use

as output rectifiers, free wheeling, protection and steering diodes in

switching power supplies, inverters and other inductive switching

circuits.

Features

• Low Forward Voltage

• 150°C Operating Junction Temperature

• Epoxy Meets UL 94 V−0 @ 0.125 in

• Compact Size

• Lead Formed for Surface Mount

• SBRD8 Prefix for Automotive and Other Applications Requiring

Unique Site and Control Change Requirements; AEC−Q101

Qualified and PPAP Capable

• These Devices are Pb−Free and are RoHS Compliant*

Mechanical Characteristics

• Case: Epoxy, Molded

• Weight: 0.4 Gram (Approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead and Mounting Surface Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

• Shipped 75 Units Per Plastic Tube

• ESD Rating:

♦ Machine Model = C (> 400 V)

♦ Human Body Model = 3B (> 8000 V)

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

Device Package Shipping

†

ORDERING INFORMATION

SCHOTTKY BARRIER

RECTIFIER

8.0 AMPERES, 35 VOLTS

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specifications

Brochure, BRD8011/D.

MBRD835LT4G DPAK

(Pb−Free)

2,500 /

Tape & Reel **

DPAK

CASE 369C

MARKING DIAGRAM

B835LG = Specific Device Number

Y = Year

WW = Work Week

G = Pb−Free Device

YWW

835LG

MBRD835LG DPAK

(Pb−Free)

75 Units / Rail

http://onsemi.com

SBRD8835LG DPAK

(Pb−Free)

75 Units / Rail

SBRD8835LT4G DPAK

(Pb−Free)

2,500 /

Tape & Reel **

** 16 mm Tape, 13” Reel

Summary of content (5 pages)

PAGE 1
MBRD835LG, MBRD835LT4G, SBRD8835LG, SBRD8835LT4G SWITCHMODE Power Rectifier http://onsemi.com SCHOTTKY BARRIER RECTIFIER 8.0 AMPERES, 35 VOLTS DPAK Surface Mount Package This SWITCHMODE power rectifier which uses the Schottky Barrier principle with a proprietary barrier metal, is designed for use as output rectifiers, free wheeling, protection and steering diodes in switching power supplies, inverters and other inductive switching circuits.
PAGE 2
MBRD835LG, MBRD835LT4G, SBRD8835LG, SBRD8835LT4G MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 35 V Average Rectified Forward Current (At Rated VR, TC = 88°C) IF(AV) Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 80°C) IFRM Non−Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM Repetitive Avalanche Current (Current Decaying Li
PAGE 3
MBRD835LG, MBRD835LT4G, SBRD8835LG, SBRD8835LT4G IF, INSTANTANEOUS FORWARD CURRENT (AMPS) iF, INSTANTANEOUS FORWARD CURRENT (mA) TYPICAL CHARACTERISTICS 10 TJ = 125°C 25°C 1 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 vF, INSTANTANEOUS VOLTAGE (VOLTS) 0.6 10 TJ = 125°C 1 75°C 0.1 25°C 0.01 0 Figure 1. Maximum Forward Voltage 0.1 0.2 0.3 0.4 0.5 VF, INSTANTANEOUS VOLTAGE (VOLTS) 0.6 Figure 2.
PAGE 4
MBRD835LG, MBRD835LT4G, SBRD8835LG, SBRD8835LT4G TYPICAL CHARACTERISTICS C, CAPACITANCE (pF) TJ = 25°C TYPICAL MAXIMUM 1000 100 1 10 VR, REVERSE VOLTAGE (VOLTS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Maximum and Typical Capacitance 16 14.4 TJ = 125°C 12.8 R JA = 6°C/W dc (RESISTIVE LOAD) 11.2 9.6 SQUARE WAVE (CAPACITIVE IPK +5 LOAD) IAV 8 6.4 4.8 10 3.2 1.
PAGE 5
MBRD835LG, MBRD835LT4G, SBRD8835LG, SBRD8835LT4G PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C ISSUE D A E b3 c2 B Z D 1 L4 A 4 L3 b2 e 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5.