Datasheet

ManualsBrandsON Semiconductor ManualsDiodesRectifier Diode 15A 200V TO-220AC

February, 2006 − Rev. 4

1 Publication Order Number:

MUR1520/D

MUR1510, MUR1515,

MUR1520, MUR1540,

MUR1560

Preferred Devices

SWITCHMODEt

Power Rectifiers

These state−of−the−art devices are a series designed for use in

switching power supplies, inverters and as free wheeling diodes.

Features

• Ultrafast 35 and 60 Nanosecond Recovery Time

• 175°C Operating Junction Temperature

• Popular TO−220 Package

• High Voltage Capability to 600 V

• Low Forward Drop

• Low Leakage Specified @ 150°C Case Temperature

• Current Derating Specified @ Both Case and Ambient Temperatures

• Pb−Free Packages are Available*

Mechanical Characteristics:

• Case: Epoxy, Molded

• Weight: 1.9 Grams (Approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead Temperature for Soldering Purposes: 260°C Max. for

10 Seconds

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

ULTRAFAST RECTIFIERS

15 AMPERES, 100−600 VOLTS

Preferred devices are recommended choices for future use

and best overall value.

http://onsemi.com

See detailed ordering and shipping information in the package

dimensions section on page 6 of this data sheet.

ORDERING INFORMATION

TO−220AC

CASE 221B

PLASTIC

MARKING DIAGRAM

A = Assembly Location

Y = Year

WW = Work Week

G = Pb−Free Package

U15xx = Device Code

xx = 10, 15, 20, 40 or 60

KA = Diode Polarity

AY WWG

U15xx

Summary of content (7 pages)

PAGE 1
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 Preferred Devices SWITCHMODEt Power Rectifiers http://onsemi.com These state−of−the−art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes.
PAGE 2
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MAXIMUM RATINGS MUR Symbol 1510 1515 1520 1540 1560 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 100 150 200 400 600 V Average Rectified Forward Current (Rated VR) IF(AV) 15 @ TC = 150°C 15 @ TC = 145°C A Peak Rectified Forward Current (Rated VR, Square Wave, 20 kHz) IFRM 30 @ TC = 150°C 30 @ TC = 145°C A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave,
PAGE 3
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1510, MUR1515, MUR1520 100 TJ = 150°C 100°C 70 25°C 50 30 TJ = 150°C 20 10 100°C 5 2 1 0.5 25°C 0.2 0.1 0.05 7.0 0.02 0.01 0 40 20 5.0 60 100 80 120 160 140 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 RqJA = 16°C/W As Obtained From A Small TO−220 Heatsink Square Wave 6.
PAGE 4
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1540 100 100 TJ = 150°C 50 IR, REVERSE CURRENT (m A) 70 50 100°C TJ = 150°C 25°C 30 5 25°C 2 1 0.5 10 7.0 0.02 0.01 0 100 50 5.0 150 200 250 300 400 350 450 500 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 Square Wave 8.0 6.0 4.0 Rated Voltage Applied 2.0 0 140 160 150 170 Figure 8.
PAGE 5
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1560 200 100 70 50 IR, REVERSE CURRENT (m A) 100 50 TJ = 150°C 30 100°C 25°C 10 2 1 0.5 25°C 0.2 0.1 0.02 150 250 200 5.0 300 350 400 450 500 600 650 550 VR, REVERSE VOLTAGE (VOLTS) Figure 12. Typical Reverse Current 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 dc 12 Square Wave 10 8.0 6.0 4.0 Rated Voltage Applied 2.0 0 140 150 160 Figure 13. Current Derating, Case dc 8.
PAGE 6
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 ZqJC(t) = r(t) RqJC RqJC = 1.5°C/W MAX P(pk) 0.05 t2 SINGLE PULSE 0.02 0.01 0.01 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) − TC = P(pk) ZqJC(t) t1 DUTY CYCLE, D = t1/t2 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, TIME (ms) Figure 16.
PAGE 7
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.