Datasheet

ManualsBrandsON Semiconductor ManualsDiodesRectifier Diode 4A 1kV DO-201AD

July, 2006 − Rev. 6

1 Publication Order Number:

MUR480E/D

MUR480E, MUR4100E

SWITCHMODEt

Power Rectifiers

Ultrafast “E’’ Series with High Reverse

Energy Capability

These state−of−the−art devices are designed for use in switching

power supplies, inverters and as free wheeling diodes.

Features

• 20 mJ Avalanche Energy Guaranteed

• Excellent Protection Against Voltage Transients in Switching

Inductive Load Circuits

• Ultrafast 75 Nanosecond Recovery Time

• 175°C Operating Junction Temperature

• Low Forward Voltage

• Low Leakage Current

• High Temperature Glass Passivated Junction

• Reverse Voltage to 1000 V

• These are Pb−Free Devices*

Mechanical Characteristics:

• Case: Epoxy, Molded

• Weight: 1.1 Gram (Approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

• Shipped in Plastic Bags, 5,000 per Bag

• Available Tape and Reel, 1,500 per Reel, by Adding a “RL’’ Suffix to

the Part Number

• Polarity: Cathode indicated by Polarity Band

MAXIMUM RATINGS

Rating Symbol Value Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage MUR480E

MUR4100E

RRM

RWM

800

1000

Average Rectified Forward Current

(Square Wave; Mounting Method #3 Per Note 2)

F(AV)

4.0 @

= 35°C

Non−Repetitive Peak Surge Current

(Surge Applied at Rated Load Conditions

Halfwave, Single Phase, 60 Hz)

FSM

70 A

Operating Junction and Storage Temperature

Range

, T

stg

−65 to

+175

°C

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

ULTRAFAST RECTIFIER

4.0 AMPERES, 800−1000 VOLTS

http://onsemi.com

AXIAL LEAD

CASE 267

STYLE 1

A = Assembly Location

MUR4xxx= Device Number (see page 2)

YY = Year

WW = Work Week

G = Pb−Free Package

MARKING DIAGRAM

MUR

4xxx

YYWWG

(Note: Microdot may be in either location)

See detailed ordering and shipping information on page 2 o

this data sheet.

ORDERING INFORMATION

Summary of content (6 pages)

PAGE 1
MUR480E, MUR4100E SWITCHMODEt Power Rectifiers Ultrafast “E’’ Series with High Reverse Energy Capability These state−of−the−art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. ULTRAFAST RECTIFIER 4.0 AMPERES, 800−1000 VOLTS Features • 20 mJ Avalanche Energy Guaranteed • Excellent Protection Against Voltage Transients in Switching • • • • • • • http://onsemi.
PAGE 2
MUR480E, MUR4100E THERMAL CHARACTERISTICS Rating Maximum Thermal Resistance, Junction−to−Ambient Symbol Value Unit RqJA See Note 2 °C/W Symbol Max Unit ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 1) (iF = 3.0 Amps, TJ = 150°C) (iF = 3.0 Amps, TJ = 25°C) (iF = 4.0 Amps, TJ = 25°C) vF V Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 150°C) (Rated dc Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.
PAGE 3
MUR480E, MUR4100E MUR480E, MUR4100E IR, REVERSE CURRENT (m A) 20 25°C TJ = 175°C 10 100°C 7.0 3.0 2.0 100°C 25°C *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 0 100 200 300 400 500 600 700 800 VR, REVERSE VOLTAGE (VOLTS) 0.7 Figure 2. Typical Reverse Current* 900 1000 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0 0.2 0.
PAGE 4
MUR480E, MUR4100E +VDD IL 40 mH COIL BVDUT VD ID MERCURY SWITCH ID IL DUT S1 VDD t0 Figure 6. Test Circuit ǒ BV 2 DUT W [ 1 LI LPK AVAL 2 BV –V DUT DD t2 t Figure 7. Current−Voltage Waveforms The unclamped inductive switching circuit shown in Figure 6 was used to demonstrate the controlled avalanche capability of the new “E’’ series Ultrafast rectifiers. A mercury switch was used instead of an electronic switch to simulate a noisy environment when the switch was being opened.
PAGE 5
MUR480E, MUR4100E NOTE 2 − AMBIENT MOUNTING DATA Data shown for thermal resistance junction−to−ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA Lead Length, L (IN) 1/8 1/4 1/2 3/4 50 51 53 55 58 59 61 63 Units °C/W °C/W 28 °C/W 3 MOUNTING METHOD 1 P.C. Board Where Available Copper Surface area is small.
PAGE 6
MUR480E, MUR4100E PACKAGE DIMENSIONS AXIAL LEAD CASE 267−05 (DO−201AD) ISSUE G K D A 1 B 2 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 −−− MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 −−− STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.