Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsLogic ICsLogic IC - Gate AND gate 7SZ SOT 23 5

October-2017, Rev . 2 NC7SZ08/D

NC7SZ08 — TinyLogic

UHS Two-Input AND Gate

NC7SZ08

TinyLogic

UHS Two-Input AND Gate

Features

 Ultra-High Speed: t

2.7ns (Typical) into 50pF at 5V

 High Output Drive: ±24mA at 3V V

 Broad V

Operating Range: 1.65V to 5.5V

 Matches Performance of LCX Operated at 3.3V V

 Pow er Dow n High Impedance Inputs/Outputs

 Over-Voltage Tolerance inputs facilitate 5V to 3V

Translation

 Proprietary Noise/EMI Reduction Circuitry

 Ultra-Small MicroPak™ Packages

 Space-Saving SOT23 and SC70 Packages

Description

The NC7SZ08 is a single tw o-input AND gate from ON

Semiconductor’s Ultra-High Speed (UHS) series of

TinyLogic

. The device is fabricated w ith advanced CMOS

technology to achieve ultra-high speed w ith high output

drive w hile maintaining low static pow er dissipation over

a broad V

operating range. The devise is specified to

operate over the 1.65V to 5.5V V

operating range. The

inputs and output are high impedance w hen V

is 0V.

Inputs tolerate voltages up to 6V, independent of V

operating voltage.

Ordering Information

Part Number

Top Mark

Eco Status

Package

Packing

Method

NC7SZ08M5X

7Z08

RoHS

5-Lead SOT23, JEDEC MO-178 1.6mm

3000 Units on

Tape & Reel

NC7SZ08P5X

Z08

RoHS

5-Lead SC70, EIAJ SC-88a, 1.25mm Wide

3000 Units on

Tape & Reel

NC7SZ08L6X

RoHS

6-Lead MicroPak™, 1.00mm Wide

5000 Units on

Tape & Reel

NC7SZ08FHX

Green

6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch

5000 Units on

Tape & Reel

Summary of content (11 pages)

PAGE 1
Features Description  The NC7SZ08 is a single tw o-input AND gate from ON Semiconductor’s Ultra-High Speed (UHS) series of TinyLogic ®. The device is fabricated w ith advanced CMOS technology to achieve ultra-high speed w ith high output drive w hile maintaining low static pow er dissipation over a broad V CC operating range. The devise is specified to operate over the 1.65V to 5.5V V CC operating range. The inputs and output are high impedance w hen V CC is 0V.
PAGE 2
NC7SZ08 — TinyLogic® UHS Two-Input AND Gate Connection Diagrams IEEE/IEC Figure 1. Logic Sym bol Pin Configurations Figure 2. SC70 and SOT23 (Top View ) Figure 3. MicroPak (Top Through View ) Pin Definitions Pin # SC70 / SOT23 Pin # MicroPak Name Description 1 1 A Input 2 2 B Input 3 3 GND Ground 4 4 Y Output 5 6 V CC Supply Voltage 5 NC No Connect Function Table Y=AB Inputs Output A B Y L L L L H L H L L H H H H = HIGH Logic Level L = LOW Logic Level www.
PAGE 3
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit V CC Supply Voltage -0.5 6.0 V V IN DC Input Voltage -0.5 6.
PAGE 4
25 MicroPak-6 500 MicroPak2-6 560 Note: 1. Unused inputs must be held HIGH or LOW. They may not float. www.onsemi.
PAGE 5
Sym bol Param eter V CC TA=25°C Conditions Min. V IH V IL HIGH Level Input Voltage 0.75V CC 2.30 to 5.50 0.70V CC 0.70V CC IIN IOFF ICC LOW Level Output Voltage Input Leakage Current Power Off Leakage Current Quiescent Supply Current Units Max. V 0.25V CC 0.25V CC 0.30V CC 0.30V CC V 1.65 1.55 1.65 1.55 1.80 1.70 1.80 1.70 2.20 2.30 2.20 3.00 2.90 3.00 2.90 4.50 4.40 4.50 4.40 V IN=V IH, IOH=-100µA 1.65 IOH=-4mA 1.29 1.52 1.29 2.30 IOH=-8mA 1.90 2.15 1.
PAGE 6
Sym bol Param eter V CC Typ. Max. Min. Max. 2.0 6.3 12.0 2.0 12.7 2.0 5.2 10.0 2.0 10.5 0.8 3.4 7.0 0.8 7.5 3.30 ± 0.30 0.5 2.6 4.7 0.5 5.0 5.00 ± 0.50 0.5 2.2 4.1 0.5 4.4 1.5 3.3 5.2 1.5 5.5 0.8 2.7 4.5 0.8 4.8 1.80 2.50 ± 0.20 tPLH, tPHL TA=-40 to +85°C Min. 1.65 Propagation Delay TA=25°C Conditions 3.30 ± 0.30 5.00 ± 0.50 CL=15pF, RL=1M CL=50pF, RL=500 CIN Input Capacitance 0.00 4 Power Dissipation (2) Capacitance 3.30 20 CPD 5.
PAGE 7
NC7SZ08 — TinyLogic® UHS Two-Input AND Gate Physical Dimensions 3.00 2.80 5 SYMM CL 0.95 0.95 A 4 B 3.00 2.60 1.70 1.50 1 2 2.60 3 (0.30) 1.00 0.50 0.30 0.95 0.20 1.90 C A B 0.70 TOP VIEW LAND PATTERN RECOMMENDATION SEE DETAIL A 1.30 0.90 1.45 MAX 0.15 0.05 0.22 0.08 C 0.10 C NOTES: UNLESS OTHEWISE SPECIFIED GAGE PLANE A) THIS PACKAGE CONFORMS TO JEDEC MO-178, ISSUE B, VARIATION AA, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) MA05Brev5 0.25 8° 0° 0.55 0.35 0.
PAGE 8
NC7SZ08 — TinyLogic® UHS Two-Input AND Gate Physical Dimensions Figure 8. 5-Lead, SC70, EIAJ SC-88a, 1.25m m Wide Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision.
PAGE 9
NC7SZ08 — TinyLogic® UHS Two-Input AND Gate Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X 0.25 0.15 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL (0.13) 4X Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2.
PAGE 10
NC7SZ08 — TinyLogic® UHS Two-Input AND Gate Physical Dimensions DETAIL A 5X Figure 10. 6-Lead, MicroPak2, 1x1m m Body, .35m m Pitch Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Pl ease note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision.
PAGE 11
NC7SZ08 — TinyLogic® UHS Two-Input AND Gate ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual proper ty. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf.