Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsLogic ICsLogic IC - Multiplexer Multiplexer Single supply SC 70 6

November-2017, Rev. 2 NC7SZ157/D

NC7SZ157 — TinyLogic

UHS 2-Input Non-Inverting Multiplexer

NC7SZ157

TinyLogic

UHS 2-Input Non-Inverting Multiplexer

Features

 Broad V

Operating Range: 1.65V to 5.5V

 Ultra High-Speed

 Pow er Dow n High-Impedance Inputs/Outputs

 Over-Voltage Tolerance Inputs Facilitate 5V to 3V

Translation

 Proprietary Noise/EMI Reduction Circuitry

 Ultra-Small MicroPak™ Packages

 Space-Saving SC70 Package

Description

The NC7SZ157 is a single, high performance, 2-to-1

CMOS non-inverting multiplexer from ON

Semiconductor’s Ultra-High Speed series of TinyLogic

The device is fabricated w ith advanced CMOS

technology to achieve ultra high speed w ith high output

drive w hile maintaining low static pow er dissipation over

a broad V

operating range. The device is specified to

operate over the 1.65V to 5.5V VCC operating range. The

inputs and outputs are high impedance w hen V

is 0V.

Inputs tolerate voltages up to 5.5V independent of V

operating range.

Ordering Information

Part Number

Top Mark

Eco

Status

Package

Packing Method

NC7SZ157P6X

ZF7

RoHS

6-Lead SC70, EIAJ SC-88, 1.25mm Wide

3000 Units on

Tape & Reel

NC7SZ157L6X

RoHS

6-Lead MicroPak™, 1.00mm Wide

5000 Units on

Tape & Reel

NC7SZ157FHX

Green

6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch

5000 Units on

Tape & Reel

Summary of content (9 pages)

PAGE 1
Features Description     The NC7SZ 157 is a single, high performance, 2-to-1 CMOS non-inverting multiplexer from ON ® Semiconductor ’s Ultra- High Speed series of TinyLogic . The dev ice is fabricated w ith advanced CMOS technology to achieve ultra high speed w ith high output drive w hile maintaining low static pow er dissipation over a broad V CC operating range. The device is specified to operate over the 1.65V to 5.5V V CC operating range.
PAGE 2
IEEE/IEC Figure 1. Logic Sym bol Pin Configurations Figure 3. MicroPak™ (Top Through View ) Figure 2. SC70 (Top View ) Figure 4. Pin 1 Orientation Notes: 1. AAA represents product code top mark (see Ordering Information). 2. Orientation of top mark determines pin one location. 3. Reading the top mark left to right, pin one is the low er left pin.
PAGE 3
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit V CC Supply Voltage -0.5 7.0 V V IN DC Input Voltage -0.5 7.0 V -0.
PAGE 4
Sym bol Param eter V CC TA=+25°C Conditions Min. V IH HIGH Level Input 1.65 to 1.95 Voltage 2.30 to 5.50 V IL LOW Level Input Voltage 0.75V CC 0.75V CC 0.70V CC 0.70V CC 0.30V CC 0.30V CC 4.50 1.65 2.30 IOH= -4mA 1.55 1.65 1.55 2.20 2.30 2.20 2.90 3.00 2.90 4.40 4.50 4.40 1.29 1.52 1.29 1.90 1.90 3.00 V IN=V IL IOH= -8mA or V IH IOH= -16mA 2.15 2.40 2.80 2.40 3.00 IOH= -24mA 2.30 3.68 2.30 4.50 IOH= -32mA 3.90 4.20 1.65 2.30 3.
PAGE 5
Sym bol Param eter CIN CPD TA=+25°C Conditions TA=-40 to +85°C Min. Typ. Max. Min. Max. 1.80 ± 0.15 2.5 6.0 11.5 2.5 12.0 2.50 ± 0.20 CL=15pF, 3.30 ± 0.30 RL=1M , 1.2 3.5 6.1 1.2 6.5 0.8 2.6 4.1 0.8 4.5 5.00 ± 0.50 0.5 1.9 3.2 0.5 3.5 1.80 ± 0.15 2.5 5.9 10.0 2.5 10.5 5.00 ± 0.50 CL=15pF, 3.30 ± 0.30 RL=1M , 1.2 3.5 5.8 1.2 6.1 0.8 2.6 3.9 0.8 4.2 5.00 ± 0.50 0.5 1.9 3.1 0.5 3.3 Propagation Delay S to Z 3.30 ± 0.30 CL=50pF, 5.00 ± 0.
PAGE 6
NC7SZ157 — TinyLogic® UHS 2-Input Non-Inverting Multiplexer Physical Dimensions SYMM C L 2.00±0.20 0.65 A 0.50 MIN 4 6 B PIN ONE 1.25±0.10 1 1.90 3 0.30 0.15 (0.25) 0.40 MIN 0.10 0.65 A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.10±0.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS.
PAGE 7
NC7SZ157 — TinyLogic® UHS 2-Input Non-Inverting Multiplexer Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 0.25 0.15 6X 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL (0.13) 4X Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2.
PAGE 8
NC7SZ157 — TinyLogic® UHS 2-Input Non-Inverting Multiplexer Physical Dimensions DETAIL A 5X Figure 10. 6-Lead, MicroPak2, 1x1m m Body, .35m m Pitch Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision.
PAGE 9
NC7SZ157 — TinyLogic® UHS 2-Input Non-Inverting Multiplexer ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf.