Datasheet

NCL30081
http://onsemi.com
4
Table 2. MAXIMUM RATINGS TABLE
Symbol Rating Value Unit
V
CC(MAX)
I
CC(MAX)
Maximum Power Supply voltage, VCC pin, continuous voltage
Maximum current for VCC pin
−0.3, +35
Internally limited
V
mA
V
DRV(MAX)
I
DRV(MAX)
Maximum driver pin voltage, DRV pin, continuous voltage
Maximum current for DRV pin
−0.3, V
DRV
(Note 1)
−500, +800
V
mA
V
MAX
I
MAX
Maximum voltage on low power pins (except pins DRV and VCC)
Current range for low power pins (except pins ZCD, DRV and VCC)
−0.3, +5.5
−2, +5
V
mA
V
ZCD(MAX)
I
ZCD(MAX)
Maximum voltage for ZCD pin
Maximum current for ZCD pin
−0.3, +10
−2, +5
V
mA
R
θ
J−A
Thermal Resistance, Junction−to−Air 360 °C/W
T
J(MAX)
Maximum Junction Temperature 150 °C
Operating Temperature Range −40 to +125 °C
Storage Temperature Range −60 to +150 °C
ESD Capability, HBM model (Note 2) 4 kV
ESD Capability, MM model (Note 2) 200 V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. V
DRV
is the DRV clamp voltage V
DRV(high)
when V
CC
is higher than V
DRV(high)
. V
DRV
is V
CC
unless otherwise noted.
2. This device series contains ESD protection and exceeds the following tests: Human Body Model 4000 V per Mil−Std−883, Method 3015.
3. This device contains latch−up protection and exceeds 100 mA per JEDEC Standard JESD78 except for VIN pin which passes 60 mA.