Datasheet

NCP5006
http://onsemi.com
4
MAXIMUM RATINGS
Rating Symbol Value Unit
Power Supply V
bat
6.0 V
Output Power Supply Voltage Compliance V
out
28 V
Digital Input Voltage
Digital Input Current
EN −0.3 < V
in
< V
bat
+ 0.3
1.0
V
mA
ESD Capability (Note 1)
Human Body Model (HBM)
Machine Model (MM)
V
ESD
2.0
200
kV
V
TSOP−5 Package
Power Dissipation @ T
A
= +85°C (Note 2)
Thermal Resistance, Junction−to−Air
P
D
R
q
JA
160
250
mW
°C/W
Operating Ambient Temperature Range T
A
−25 to +85 °C
Operating Junction Temperature Range T
J
−25 to +125 °C
Maximum Junction Temperature T
Jmax
+150 °C
Storage Temperature Range T
stg
−65 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model (HBM) "2.0 kV per JEDEC standard: JESD22−A114
Machine Model (MM) "200 V per JEDEC standard: JESD22−A115
2. The maximum package power dissipation limit must not be exceeded.
3. Latch−up current maximum rating: "100 mA per JEDEC standard: JESD78.
4. Moisture Sensivity Level (MSL): 1 per IPC/JEDEC standard: J−STD−020A.
POWER SUPPLY SECTION (Typical values are referenced to T
A
= +25°C, Min & Max values are referenced −25°C to +85°C ambient
temperature, unless otherwise noted.)
Rating Pin Symbol Min Typ Max Unit
Power Supply 4 V
bat
2.7 5.5 V
Output Load Voltage Compliance 5 V
out
21 24 V
Continuous DC Current in the Load @ V
out
= 3xLED, L = 22 mH,
ESR < 1.5 W, V
bat
= 3.60 V
5 I
out
50 mA
Stand By Current, @ I
out
= 0 mA, EN = L, V
bat
= 3.6 V 4 I
stdb
0.3 mA
Stand By Current, @ I
out
= 0 mA, EN = L, V
bat
= 5.5 V 4 I
stdb
0.8 3.0 mA
Inductor Discharging Time @ V
bat
= 3.6 V, L = 22 mH, 3xLED,
I
out
= 10 mA
4 Toffmax 320 ns
Thermal Shutdown Protection T
SD
160 °C
Thermal Shutdown Protection Hysteresis T
SDH
30 °C